# Environmental

**URL:** https://community.sparkfun.com/c/sensors/environmental/40.md?page=3

[Latest](https://community.sparkfun.com/latest.md) · [Categories](https://community.sparkfun.com/categories.md) · [Tags](https://community.sparkfun.com/tags.md)

**Page:** 4

---

## [Connecting a RTK Facet L-Band to a Magnetometer](https://community.sparkfun.com/t/connecting-a-rtk-facet-l-band-to-a-magnetometer/47058)

<div class="topic-metadata">

**Author:** [@native\_mat\_posteo.de](https://community.sparkfun.com/u/native_mat_posteo.de)\
**Replies:** 2\
**Last updated:** [March 8, 2024, 12:36am UTC](https://community.sparkfun.com/t/connecting-a-rtk-facet-l-band-to-a-magnetometer/47058 "2024-03-08T00:36:04Z")

</div>

HI All, I’m fairly novice to this, but have a working RTK Facet L-Band just using the Rover 30-50cm accuracy on it. I would like to connect this via cable to a Sensys R3 Magnetometer. Some guidelines: external receiver (…

---

## [Long cable needed between SparkFun Temperature Sensor - STTS22H (Qwiic) and RPi Zero.](https://community.sparkfun.com/t/long-cable-needed-between-sparkfun-temperature-sensor-stts22h-qwiic-and-rpi-zero/47016)

<div class="topic-metadata">

**Author:** [@mjvandermeulen](https://community.sparkfun.com/u/mjvandermeulen)\
**Replies:** 1\
**Last updated:** [February 23, 2024, 8:39pm UTC](https://community.sparkfun.com/t/long-cable-needed-between-sparkfun-temperature-sensor-stts22h-qwiic-and-rpi-zero/47016 "2024-02-23T20:39:21Z")

</div>

With one RPi Zero I would like to measure the temperature in 2 different locations, with one sensor close to the RPi and one 10 feet (3 meters) away. How long can a cable be between the RPi Zero and the SparkFun Tempe…

---

## [Question and troubleshooting question concerning Weather Station Kit SEN-15901](https://community.sparkfun.com/t/question-and-troubleshooting-question-concerning-weather-station-kit-sen-15901/46974)

<div class="topic-metadata">

**Author:** [@kai-made](https://community.sparkfun.com/u/kai-made)\
**Replies:** 1\
**Last updated:** [February 16, 2024, 4:37pm UTC](https://community.sparkfun.com/t/question-and-troubleshooting-question-concerning-weather-station-kit-sen-15901/46974 "2024-02-16T16:37:16Z")

</div>

I have two of these, one is virtually brand new, but sat on my shelf for over a year. The other was in service for 2 years. They both worked but I am running into a custom install issue. I have been working on bringing …

---

## [Sparkfun Analog MEMS Microphone Breakout - ICS-40180](https://community.sparkfun.com/t/sparkfun-analog-mems-microphone-breakout-ics-40180/46956)

<div class="topic-metadata">

**Author:** [@JohnZ](https://community.sparkfun.com/u/JohnZ)\
**Replies:** 1\
**Last updated:** [February 13, 2024, 12:20pm UTC](https://community.sparkfun.com/t/sparkfun-analog-mems-microphone-breakout-ics-40180/46956 "2024-02-13T12:20:34Z")

</div>

Dear Sparkfun Staff, I experimented with the ICS-40180 breakout board and it worked very well in my photoacoustic experiment. For better mecahnical stability, the light source LED and the microphone need to be placed on…

---

## [Photoacoustic Spectroscopy CO2 Sensor  SEN-22956](https://community.sparkfun.com/t/photoacoustic-spectroscopy-co2-sensor-sen-22956/46923)

<div class="topic-metadata">

**Author:** [@whatpic](https://community.sparkfun.com/u/whatpic)\
**Replies:** 2\
**Last updated:** [February 7, 2024, 3:13pm UTC](https://community.sparkfun.com/t/photoacoustic-spectroscopy-co2-sensor-sen-22956/46923 "2024-02-07T15:13:23Z")

</div>

I’m using the Sparkfun Photoacoustic Spectroscopy CO2 Sensor SEN-22956. At the bottom of page 19 of the data sheet it says: “Complete ‘Register-map description’ has been covered in a separate application note titled as …

---

## [Finding the resistance values for the mq136 H2S gas sensor](https://community.sparkfun.com/t/finding-the-resistance-values-for-the-mq136-h2s-gas-sensor/46874)

<div class="topic-metadata">

**Author:** [@kgrant](https://community.sparkfun.com/u/kgrant)\
**Replies:** 1\
**Last updated:** [January 30, 2024, 7:49pm UTC](https://community.sparkfun.com/t/finding-the-resistance-values-for-the-mq136-h2s-gas-sensor/46874 "2024-01-30T19:49:49Z")

</div>

https://www.sparkfun.com/products/17052 I recently acquired this MQ136 H2S gas sensor and was curious about the code that was in the video on the product page. I couldn’t find it on Github, so I decided to just copy the…

---

## ["heading" variable in MMC5983 magnetometer: Arduino library examples](https://community.sparkfun.com/t/heading-variable-in-mmc5983-magnetometer-arduino-library-examples/46855)

<div class="topic-metadata">

**Author:** [@alejandro.allievi](https://community.sparkfun.com/u/alejandro.allievi)\
**Replies:** 2\
**Last updated:** [January 25, 2024, 6:08pm UTC](https://community.sparkfun.com/t/heading-variable-in-mmc5983-magnetometer-arduino-library-examples/46855 "2024-01-25T18:08:51Z")

</div>

In MMC5983 magnetometer (Arduino library example 3) it says: “// Magnetic north is oriented with the Y axis // Convert the X and Y fields into heading using atan2 (Arc Tangent 2) heading = atan2(scaledX, 0 - scaledY);”. …

---

## [SparkFun GPS-RTK Board - NEO-M8P-2 (Qwiic)](https://community.sparkfun.com/t/sparkfun-gps-rtk-board-neo-m8p-2-qwiic/46841)

<div class="topic-metadata">

**Author:** [@ms1988](https://community.sparkfun.com/u/ms1988)\
**Replies:** 1\
**Last updated:** [January 23, 2024, 8:47pm UTC](https://community.sparkfun.com/t/sparkfun-gps-rtk-board-neo-m8p-2-qwiic/46841 "2024-01-23T20:47:38Z")

</div>

I plan to use my SparkFun GPS-RTK Board - NEO-M8P-2 (Qwiic) with an Arduino BLE Sense Rev2. I have an SMA to uFL/u.FL/IPX/IPEX RF Adapter Cable (Adafruit - Mfr. No: 851) and an Adafruit Accessories GPS Antenna 3-5V 28dB …

---

## [Increase pressure sample using MS5803\_14ba](https://community.sparkfun.com/t/increase-pressure-sample-using-ms5803_14ba/46825)

<div class="topic-metadata">

**Author:** [@Irit\_Onel](https://community.sparkfun.com/u/Irit_Onel)\
**Replies:** 4\
**Last updated:** [January 23, 2024, 2:54pm UTC](https://community.sparkfun.com/t/increase-pressure-sample-using-ms5803_14ba/46825 "2024-01-23T14:54:23Z")

</div>

Hi there, I require quick readings of pressure (few times each second , and display ) with this sensor: MS5803 sensor(ADDRESS\_HIGH); and this display: U8X8\_SSD1306\_128X32\_UNIVISION\_SW\_I2C u8x8(/\* clock=/ 3, / data=/…

---

## [Triad Connectivity Issues](https://community.sparkfun.com/t/triad-connectivity-issues/46813)

<div class="topic-metadata">

**Author:** [@Prof\_UK](https://community.sparkfun.com/u/Prof_UK)\
**Replies:** 2\
**Last updated:** [January 23, 2024, 2:19pm UTC](https://community.sparkfun.com/t/triad-connectivity-issues/46813 "2024-01-23T14:19:10Z")

</div>

Hi there, I am trying to connect a Sparkfun Triad (AS7265x) to an Arduino Mega and I am having difficulties, and I am hoping someone could offer me some assistance if possible. I am using a 3.3v bidirectional level shi…

---

## [Three Sparkfun GPS boards do not work but smartphone in the same location does](https://community.sparkfun.com/t/three-sparkfun-gps-boards-do-not-work-but-smartphone-in-the-same-location-does/46808)

<div class="topic-metadata">

**Author:** [@smhodge42](https://community.sparkfun.com/u/smhodge42)\
**Replies:** 4\
**Last updated:** [January 19, 2024, 5:05pm UTC](https://community.sparkfun.com/t/three-sparkfun-gps-boards-do-not-work-but-smartphone-in-the-same-location-does/46808 "2024-01-19T17:05:43Z")

</div>

I recently purchased a ZOE-M9N GPS board because two earlier Sparkfun GPS boards that I purchased (ZOE-M8Q and XA1110) would not find any satellites. Well, the M9N can’t either. All 3 boards have a chip antenna and are b…

---

## [LDR Photoresistor SEN-09088](https://community.sparkfun.com/t/ldr-photoresistor-sen-09088/46790)

<div class="topic-metadata">

**Author:** [@proj964](https://community.sparkfun.com/u/proj964)\
**Replies:** 1\
**Last updated:** [January 16, 2024, 5:07am UTC](https://community.sparkfun.com/t/ldr-photoresistor-sen-09088/46790 "2024-01-16T05:07:52Z")

</div>

https://www.sparkfun.com/products/9088 the data sheet for this item doesn’t appear to me to match the technical description on the web page… Jon

---

## [Sparkfun Pressure Sensor](https://community.sparkfun.com/t/sparkfun-pressure-sensor/46779)

<div class="topic-metadata">

**Author:** [@w0711442](https://community.sparkfun.com/u/w0711442)\
**Replies:** 3\
**Last updated:** [January 15, 2024, 2:39am UTC](https://community.sparkfun.com/t/sparkfun-pressure-sensor/46779 "2024-01-15T02:39:16Z")

</div>

My team is building a device that collects data and will be placed on the back of a crocodile. Can any of the Sparkfun pressure sensors be fully submerged under water, with or without protection? If anyone has tested a p…

---

## [Open water supply solenoid for a customizable, short period of time based on an outside termperature](https://community.sparkfun.com/t/open-water-supply-solenoid-for-a-customizable-short-period-of-time-based-on-an-outside-termperature/46778)

<div class="topic-metadata">

**Author:** [@johnhappy3](https://community.sparkfun.com/u/johnhappy3)\
**Replies:** 0\
**Last updated:** [January 13, 2024, 11:40pm UTC](https://community.sparkfun.com/t/open-water-supply-solenoid-for-a-customizable-short-period-of-time-based-on-an-outside-termperature/46778 "2024-01-13T23:40:23Z")

</div>

It’s not hard to find out how to open a 12v solenoid, that controls water through a kitchen sink type pipe but I want to do the following: If the outside temperature gets below a certain temperature (a variable set by …

---

## [Qwiic MicroPressure Sensor Soldering Question](https://community.sparkfun.com/t/qwiic-micropressure-sensor-soldering-question/46766)

<div class="topic-metadata">

**Author:** [@hwEng](https://community.sparkfun.com/u/hwEng)\
**Replies:** 0\
**Last updated:** [January 11, 2024, 4:27pm UTC](https://community.sparkfun.com/t/qwiic-micropressure-sensor-soldering-question/46766 "2024-01-11T16:27:41Z")

</div>

I am working on a project which uses the Honeywell MPRLS0025PA00001A pressure sensor (same as Sparkfun Qwicc MicroPressure Sensor). I have developed a custom board with this sensor, but have run into solder reliability i…

---

## [Problems getting readings from WeatherHat on a Rasberry Pi](https://community.sparkfun.com/t/problems-getting-readings-from-weatherhat-on-a-rasberry-pi/46760)

<div class="topic-metadata">

**Author:** [@ExtremeWeather](https://community.sparkfun.com/u/ExtremeWeather)\
**Replies:** 2\
**Last updated:** [January 10, 2024, 11:14pm UTC](https://community.sparkfun.com/t/problems-getting-readings-from-weatherhat-on-a-rasberry-pi/46760 "2024-01-10T23:14:56Z")

</div>

I’m having trouble with a WeatherHat purchased through the PiShop.us and they suggested reaching out on this forum. I was able to mount the WeatherHat on a Rasberry Pi and get it running using the Bullseye version of Li…

---

## [SparkFun 9DoF IMU Breakout - ICM-20948 (Qwiic) Data error from Raspberry](https://community.sparkfun.com/t/sparkfun-9dof-imu-breakout-icm-20948-qwiic-data-error-from-raspberry/46762)

<div class="topic-metadata">

**Author:** [@Jeff\_shen](https://community.sparkfun.com/u/Jeff_shen)\
**Replies:** 0\
**Last updated:** [January 10, 2024, 9:51pm UTC](https://community.sparkfun.com/t/sparkfun-9dof-imu-breakout-icm-20948-qwiic-data-error-from-raspberry/46762 "2024-01-10T21:51:00Z")

</div>

Hi! I am using ICM-20948 on Raspberry Pi, and this is the snapshot I got from running the example codes when not moving: acc\_x acc\_ y acc\_z gxRaw gyRaw gzRaw mxRaw myRaw mzRaw 16368 -01824 01432 -00207 00191 -00824 005…

---

## [SEN-11050 Flame testing of components](https://community.sparkfun.com/t/sen-11050-flame-testing-of-components/46747)

<div class="topic-metadata">

**Author:** [@PTD](https://community.sparkfun.com/u/PTD)\
**Replies:** 1\
**Last updated:** [January 10, 2024, 12:06am UTC](https://community.sparkfun.com/t/sen-11050-flame-testing-of-components/46747 "2024-01-10T00:06:50Z")

</div>

Hi, We are looking to incorporate the SEN-11050 temperature sensor assembly into a small run of products we are developing. For this product s we need to comply with IEC 62368-1 and the flame requirements for internal …

---

## [GPS NEO M9N not connecting to satellite](https://community.sparkfun.com/t/gps-neo-m9n-not-connecting-to-satellite/46652)

<div class="topic-metadata">

**Author:** [@joan](https://community.sparkfun.com/u/joan)\
**Replies:** 4\
**Last updated:** [December 27, 2023, 9:43am UTC](https://community.sparkfun.com/t/gps-neo-m9n-not-connecting-to-satellite/46652 "2023-12-27T09:43:41Z")

</div>

Hi, I received a new GPS NEO M9N with an ANN MB 00 00 antenna. when powerin it, the pps led turns on once at the start and then does not flash again I connect de GPS module via I2C to a SamD21 mini breakout. Connection…

---

## [Arduino Nano 33 BLE Sense Rev2 and SparkFun GPS libraries compatibility](https://community.sparkfun.com/t/arduino-nano-33-ble-sense-rev2-and-sparkfun-gps-libraries-compatibility/46669)

<div class="topic-metadata">

**Author:** [@ms1988](https://community.sparkfun.com/u/ms1988)\
**Replies:** 2\
**Last updated:** [December 26, 2023, 5:25pm UTC](https://community.sparkfun.com/t/arduino-nano-33-ble-sense-rev2-and-sparkfun-gps-libraries-compatibility/46669 "2023-12-26T17:25:50Z")

</div>

Hello, I’m planning to integrate my Arduino Nano 33 BLE Sense Rev2 with one of your GPS breakout boards. Could you please confirm if your official Arduino libraries for GPS, such as SparkFun\_I2C\_GPS\_Arduino\_Library.h, S…

---

## [MicroPressure with an AVR-Iot Cellular Mini - Can not connect to sensor](https://community.sparkfun.com/t/micropressure-with-an-avr-iot-cellular-mini-can-not-connect-to-sensor/46638)

<div class="topic-metadata">

**Author:** [@mikemmag](https://community.sparkfun.com/u/mikemmag)\
**Replies:** 1\
**Last updated:** [December 15, 2023, 7:35pm UTC](https://community.sparkfun.com/t/micropressure-with-an-avr-iot-cellular-mini-can-not-connect-to-sensor/46638 "2023-12-15T19:35:22Z")

</div>

The AVR- Iot Cellular board has an onboard Veml13328 light sensor which is I2C and it connects fine. There are some Wire options for this board. MicroChip specifies selecting "2x Wire, Master or Slave (32+ pin devices on…

---

## [MMC5983MA doesn't seem to work properly?](https://community.sparkfun.com/t/mmc5983ma-doesnt-seem-to-work-properly/46529)

<div class="topic-metadata">

**Author:** [@DaveNadler](https://community.sparkfun.com/u/DaveNadler)\
**Replies:** 4\
**Last updated:** [December 15, 2023, 4:50pm UTC](https://community.sparkfun.com/t/mmc5983ma-doesnt-seem-to-work-properly/46529 "2023-12-15T16:50:45Z")

</div>

I’d be delighted if someone could show me what I’m doing (or understanding) incorrectly, but I fear this device isn’t working properly? After getting dodgy reading results I decided to do a sanity check on the measured f…

---

## [Triad Dimensions](https://community.sparkfun.com/t/triad-dimensions/46622)

<div class="topic-metadata">

**Author:** [@Prof\_UK](https://community.sparkfun.com/u/Prof_UK)\
**Replies:** 1\
**Last updated:** [December 13, 2023, 10:03am UTC](https://community.sparkfun.com/t/triad-dimensions/46622 "2023-12-13T10:03:49Z")

</div>

Hi All, I wonder if someone could offer me some help… I have a project for which I am going to use a Triad sensor. Unfortunately I have a lot of printing to make the housings for the control systems, and very little ti…

---

## [Compilation error with the AS6212 sensor](https://community.sparkfun.com/t/compilation-error-with-the-as6212-sensor/46610)

<div class="topic-metadata">

**Author:** [@d3mac123](https://community.sparkfun.com/u/d3mac123)\
**Replies:** 0\
**Last updated:** [December 11, 2023, 12:10am UTC](https://community.sparkfun.com/t/compilation-error-with-the-as6212-sensor/46610 "2023-12-11T00:10:32Z")

</div>

I am trying to use the Example1\_Basic\_Temperature\_Readings with a LilyGo S3 T-Display, but I am getting the following error during compilation. Any ideas on how to fix that? In file included from /Users/alexsouza/Librar…

---

## [Sparkfun Indoor Air Quality Sensor - ENS 160 - Calibration Certificate](https://community.sparkfun.com/t/sparkfun-indoor-air-quality-sensor-ens-160-calibration-certificate/46580)

<div class="topic-metadata">

**Author:** [@vvkris97](https://community.sparkfun.com/u/vvkris97)\
**Replies:** 1\
**Last updated:** [December 1, 2023, 11:03pm UTC](https://community.sparkfun.com/t/sparkfun-indoor-air-quality-sensor-ens-160-calibration-certificate/46580 "2023-12-01T23:03:13Z")

</div>

Does the Sparkfun ENS160 have a calibration certificate? If yes where can I access it? Also, it is claimed it meets IAQ standards, is there a certificate to prove it? Where can I access that?

---

## [9Dof razor imu](https://community.sparkfun.com/t/9dof-razor-imu/46577)

<div class="topic-metadata">

**Author:** [@zukunft](https://community.sparkfun.com/u/zukunft)\
**Replies:** 1\
**Last updated:** [December 1, 2023, 10:18pm UTC](https://community.sparkfun.com/t/9dof-razor-imu/46577 "2023-12-01T22:18:46Z")

</div>

I am using 9Dof razor imu product. I want the roll, pitch, and yaw values ​​using #include \<SparkFunMPU9250-DMP.h\>, but I want the values ​​to not reference the geomagnetic machine. Can you tell me what I need to confi…

---

## [Gator Environment Board and Micro:bit V2](https://community.sparkfun.com/t/gator-environment-board-and-micro-bit-v2/41797)

<div class="topic-metadata">

**Author:** [@jeffepps](https://community.sparkfun.com/u/jeffepps)\
**Replies:** 5\
**Last updated:** [November 17, 2023, 8:26pm UTC](https://community.sparkfun.com/t/gator-environment-board-and-micro-bit-v2/41797 "2023-11-17T20:26:32Z")

</div>

I have the Gator:bit Carrier Board, a Gator Environment board, and a Micro:bit V2. The Micro:bit works fine with the carrier board. However, when I connect the environment sensor it returns a value of "972 " and an angry…

---

## [SEN-16474 , SparkFun Photodetector Breakout - MAX30101](https://community.sparkfun.com/t/sen-16474-sparkfun-photodetector-breakout-max30101/46507)

<div class="topic-metadata">

**Author:** [@Benscoffee](https://community.sparkfun.com/u/Benscoffee)\
**Replies:** 3\
**Last updated:** [November 15, 2023, 12:11am UTC](https://community.sparkfun.com/t/sen-16474-sparkfun-photodetector-breakout-max30101/46507 "2023-11-15T00:11:58Z")

</div>

I couldn’t find it in the datasheet so I would like your help. :wink: I would like to know the IR and Red light irradiation angles(glancing angle) of this Breakout. ( 30°? 60°? )

---

## [Qwiic Endpoint and Midpoint](https://community.sparkfun.com/t/qwiic-endpoint-and-midpoint/46454)

<div class="topic-metadata">

**Author:** [@ankonaskiff17](https://community.sparkfun.com/u/ankonaskiff17)\
**Replies:** 1\
**Last updated:** [November 6, 2023, 9:29pm UTC](https://community.sparkfun.com/t/qwiic-endpoint-and-midpoint/46454 "2023-11-06T21:29:42Z")

</div>

I’m using your Endpoints and Midpoints in a sensor project and I need to decide what type of box/housing to put these in but I don’t have any sense of what type of heat the Endpoint generates when it has some downstream …

---

## [high-density tag scenarios](https://community.sparkfun.com/t/high-density-tag-scenarios/46465)

<div class="topic-metadata">

**Author:** [@Nordine\_Mzali](https://community.sparkfun.com/u/Nordine_Mzali)\
**Replies:** 1\
**Last updated:** [November 6, 2023, 1:36pm UTC](https://community.sparkfun.com/t/high-density-tag-scenarios/46465 "2023-11-06T13:36:05Z")

</div>

Dear SparkFun Team/Community, I hope this message finds you well. I am currently completing a stage at EasyPost Belgium as production engineer. EasyPost is a multinational postal service company, specialized in simplify…

[Previous page](https://community.sparkfun.com/c/sensors/environmental/40.md?page=2)

[Next page](https://community.sparkfun.com/c/sensors/environmental/40.md?page=4)
