# Wireless & IoT

**URL:** https://community.sparkfun.com/c/wireless-iot/81.md?page=1

[Latest](https://community.sparkfun.com/latest.md) · [Categories](https://community.sparkfun.com/categories.md) · [Tags](https://community.sparkfun.com/tags.md)

**Page:** 2

---

## [Thermostat data logging](https://community.sparkfun.com/t/thermostat-data-logging/67363)

<div class="topic-metadata">

**Author:** [@oldbutuseful](https://community.sparkfun.com/u/oldbutuseful)\
**Replies:** 3\
**Last updated:** [November 21, 2025, 3:17am UTC](https://community.sparkfun.com/t/thermostat-data-logging/67363 "2025-11-21T03:17:46Z")

</div>

Hi, newbie here. I have an ecobee thermostat that I want to get data from (perhaps a voltage divider at the heater) and send the on/off status to a lan database. I have worked in electronics and programming (php, c#), …

---

## [IOT project to monitor two trailer batteries](https://community.sparkfun.com/t/iot-project-to-monitor-two-trailer-batteries/67362)

<div class="topic-metadata">

**Author:** [@ScottM](https://community.sparkfun.com/u/ScottM)\
**Replies:** 1\
**Last updated:** [November 19, 2025, 1:30am UTC](https://community.sparkfun.com/t/iot-project-to-monitor-two-trailer-batteries/67362 "2025-11-19T01:30:48Z")

</div>

I have 12V lighting in two enclosed trailers and I want to set up an IOT project to monitor their voltages. Call the trailers T1 and T2. The setup in T1 should upload data to the cloud using a 4G cellular network and T2 …

---

## [SparkFun LTE Stick LARA-R6 Not Responding to UART or USB](https://community.sparkfun.com/t/sparkfun-lte-stick-lara-r6-not-responding-to-uart-or-usb/67294)

<div class="topic-metadata">

**Author:** [@SeanMcT](https://community.sparkfun.com/u/SeanMcT)\
**Replies:** 6\
**Last updated:** [November 14, 2025, 8:53pm UTC](https://community.sparkfun.com/t/sparkfun-lte-stick-lara-r6-not-responding-to-uart-or-usb/67294 "2025-11-14T20:53:49Z")

</div>

I’m unable to get the LARA-R6 module to respond to AT commands via UART or enumerate as a USB device. I’ve tested two different LTE STticks with identical results. Setup: SparkFun Artemis Thing Plus SparkFun LTE S…

---

## [BlueSmirf v2 versus BlueSmirf ("v1") Gold](https://community.sparkfun.com/t/bluesmirf-v2-versus-bluesmirf-v1-gold/67269)

<div class="topic-metadata">

**Author:** [@smhodge](https://community.sparkfun.com/u/smhodge)\
**Replies:** 8\
**Last updated:** [November 7, 2025, 10:30pm UTC](https://community.sparkfun.com/t/bluesmirf-v2-versus-bluesmirf-v1-gold/67269 "2025-11-07T22:30:02Z")

</div>

Unfortunately there appears to be a big disadvantage of v2 compared to the old “v1” Gold BlueSmirf. The latter is Class 1 (nominal 100 m) but as near as I can tell from web research the ESP32 on v2 is only Class 2 (nomin…

---

## [Using NEMA 17 Stepper Motors in IoT Projects — Any Tips?](https://community.sparkfun.com/t/using-nema-17-stepper-motors-in-iot-projects-any-tips/67253)

<div class="topic-metadata">

**Author:** [@max25](https://community.sparkfun.com/u/max25)\
**Replies:** 1\
**Last updated:** [November 2, 2025, 2:55am UTC](https://community.sparkfun.com/t/using-nema-17-stepper-motors-in-iot-projects-any-tips/67253 "2025-11-02T02:55:48Z")

</div>

Hey everyone, I’ve been experimenting with NEMA 17 stepper motors for a small IoT automation project, and I’m really impressed with their precision and torque for the size. I’m using them to control valve positions remo…

---

## [Weather Board bricked by sketch](https://community.sparkfun.com/t/weather-board-bricked-by-sketch/67246)

<div class="topic-metadata">

**Author:** [@alcyon](https://community.sparkfun.com/u/alcyon)\
**Replies:** 1\
**Last updated:** [November 2, 2025, 2:32am UTC](https://community.sparkfun.com/t/weather-board-bricked-by-sketch/67246 "2025-11-02T02:32:50Z")

</div>

Hello, I have a sparkfun weather board with esp32 micromod installed. Long story short, I’ve finally been about to get most of the sensors to output and it worked fine with Arduino IoT cloud. However, yesterday I flash…

---

## [Building Datalogger Firmware](https://community.sparkfun.com/t/building-datalogger-firmware/67252)

<div class="topic-metadata">

**Author:** [@WadeG](https://community.sparkfun.com/u/WadeG)\
**Replies:** 1\
**Last updated:** [October 31, 2025, 9:08am UTC](https://community.sparkfun.com/t/building-datalogger-firmware/67252 "2025-10-31T09:08:36Z")

</div>

I am having trouble building the Datalogger IOT firmware. The latest versions of several libraries are not compatible with the current version of the sfe-datalogger main branch. The Flux-sdk install script does not pin t…

---

## [SparkFun LoRaSerial Kit](https://community.sparkfun.com/t/sparkfun-loraserial-kit/67244)

<div class="topic-metadata">

**Author:** [@D\_Yerk](https://community.sparkfun.com/u/D_Yerk)\
**Replies:** 0\
**Last updated:** [October 30, 2025, 7:34pm UTC](https://community.sparkfun.com/t/sparkfun-loraserial-kit/67244 "2025-10-30T19:34:45Z")

</div>

I recently picked up a Sparkfun LoRa Serial Kit. Admittedly I’m pretty green when it comes to Serial so I’m struggling through this a bit with limited success. My main question is what serial is this device okay to sup…

---

## [Request for customization](https://community.sparkfun.com/t/request-for-customization/67000)

<div class="topic-metadata">

**Author:** [@Nivethetha](https://community.sparkfun.com/u/Nivethetha)\
**Replies:** 1\
**Last updated:** [October 2, 2025, 3:54pm UTC](https://community.sparkfun.com/t/request-for-customization/67000 "2025-10-02T15:54:03Z")

</div>

Hi Team, We are looking to use your product PID 15006 - SparkFun LoRa Gateway - 1-Channel (ESP32) in one of our designs. It was mentioned in the manufacturer’s site that the product has been retired and is no longer ava…

---

## [BlueSMiRF v2 supported Baud rates](https://community.sparkfun.com/t/bluesmirf-v2-supported-baud-rates/66818)

<div class="topic-metadata">

**Author:** [@Scott\_Rape](https://community.sparkfun.com/u/Scott_Rape)\
**Replies:** 2\
**Last updated:** [September 6, 2025, 7:34pm UTC](https://community.sparkfun.com/t/bluesmirf-v2-supported-baud-rates/66818 "2025-09-06T19:34:33Z")

</div>

The BlueSMiRF v2 supported Baud rates are from 2400 to 921600 baud. Having a wireless serial link is exactly what I’ve been looking for however I need the a 2M baud rate. Are there any plans for a BlueSMiRF v3 that wou…

---

## [Wireless / LoRaSerial P2P](https://community.sparkfun.com/t/wireless-loraserial-p2p/65437)

<div class="topic-metadata">

**Author:** [@GasMeas](https://community.sparkfun.com/u/GasMeas)\
**Replies:** 3\
**Last updated:** [September 5, 2025, 6:33pm UTC](https://community.sparkfun.com/t/wireless-loraserial-p2p/65437 "2025-09-05T18:33:44Z")

</div>

I am looking into purchasing one of these LoRaSerial kits to communicate P2P in the field between my laptop and a Remote Operations Controller (Emerson ROC 800). We are currently using Parani blue tooth adapters, but hav…

---

## [P-P Lora units working, then not... (4 green bars on one, 0 green bars on other)](https://community.sparkfun.com/t/p-p-lora-units-working-then-not-4-green-bars-on-one-0-green-bars-on-other/66732)

<div class="topic-metadata">

**Author:** [@Peter\_R](https://community.sparkfun.com/u/Peter_R)\
**Replies:** 2\
**Last updated:** [August 28, 2025, 9:37pm UTC](https://community.sparkfun.com/t/p-p-lora-units-working-then-not-4-green-bars-on-one-0-green-bars-on-other/66732 "2025-08-28T21:37:04Z")

</div>

Hi, I’ve working with my two LoRaSerial units and making good progress on Arduino code to get them to control stoplights. Code is set as master/slave with master send ascii code to turn on Red/Yellow/Green light at rece…

---

## [AHPI7292S Ha-Low RF testing](https://community.sparkfun.com/t/ahpi7292s-ha-low-rf-testing/64588)

<div class="topic-metadata">

**Author:** [@Asmaa](https://community.sparkfun.com/u/Asmaa)\
**Replies:** 8\
**Last updated:** [August 13, 2025, 5:49pm UTC](https://community.sparkfun.com/t/ahpi7292s-ha-low-rf-testing/64588 "2025-08-13T17:49:16Z")

</div>

Hello, I would like to use AHPI7292S Evaluation Kit for an evaluation of RF performances of Ha-Low protocol. I may need your support to modify the script of the firmware in order to transmit the right waveform from the…

---

## [Amateur Radio beacon transmitter 144MHz band](https://community.sparkfun.com/t/amateur-radio-beacon-transmitter-144mhz-band/66219)

<div class="topic-metadata">

**Author:** [@VK2AAF](https://community.sparkfun.com/u/VK2AAF)\
**Replies:** 23\
**Last updated:** [August 5, 2025, 4:27pm UTC](https://community.sparkfun.com/t/amateur-radio-beacon-transmitter-144mhz-band/66219 "2025-08-05T16:27:19Z")

</div>

Apologies if I have not put this in the right category! I need to gin up a beacon transmitter for 144.424MHz with a power output of 20 watts. It needs to have GPS training for the frequency standard. It needs to be prog…

---

## [LoRaSerial - STL files for board?](https://community.sparkfun.com/t/loraserial-stl-files-for-board/65942)

<div class="topic-metadata">

**Author:** [@pauldixon](https://community.sparkfun.com/u/pauldixon)\
**Replies:** 4\
**Last updated:** [July 29, 2025, 3:35pm UTC](https://community.sparkfun.com/t/loraserial-stl-files-for-board/65942 "2025-07-29T15:35:03Z")

</div>

I purchased the LoRaSerial Kit - 915MHz and I want to make a custom enclosure combining these with the RTK Postcard. I can find the enclosure stl files for the LoRa but not the board STL file like I can with the RTK Post…

---

## [How to get wifi with teensy 4.1?](https://community.sparkfun.com/t/how-to-get-wifi-with-teensy-4-1/66197)

<div class="topic-metadata">

**Author:** [@Simon\_Goldsborough](https://community.sparkfun.com/u/Simon_Goldsborough)\
**Replies:** 1\
**Last updated:** [July 25, 2025, 1:20am UTC](https://community.sparkfun.com/t/how-to-get-wifi-with-teensy-4-1/66197 "2025-07-25T01:20:11Z")

</div>

Is there a way to use the “WiFi Module - ESP8266” with the Ethernet header on the Teensy 4.1? or would connecting a wifi adapter to the Ethernet adapter be better? im wanting to do OTA firmwear updates to the Teensy but …

---

## [Power over Ethernet + Qwiic](https://community.sparkfun.com/t/power-over-ethernet-qwiic/64853)

<div class="topic-metadata">

**Author:** [@michaelheiml82](https://community.sparkfun.com/u/michaelheiml82)\
**Replies:** 24\
**Last updated:** [July 21, 2025, 3:34pm UTC](https://community.sparkfun.com/t/power-over-ethernet-qwiic/64853 "2025-07-21T15:34:08Z")

</div>

Hi, I have a Sparkfun Qwiic Ethernet Endpoint but am unsure if and how I could use PoE (Power over Ethernet) to power the ESP32 board and everything else connected via Qwiic with it? As I understand the Hookup guide, I…

---

## [LTE CAT M1/NB-IoT Shield - SARA-R4 serial connection issue](https://community.sparkfun.com/t/lte-cat-m1-nb-iot-shield-sara-r4-serial-connection-issue/65963)

<div class="topic-metadata">

**Author:** [@jvdstoel1024](https://community.sparkfun.com/u/jvdstoel1024)\
**Replies:** 2\
**Last updated:** [July 10, 2025, 6:15am UTC](https://community.sparkfun.com/t/lte-cat-m1-nb-iot-shield-sara-r4-serial-connection-issue/65963 "2025-07-10T06:15:46Z")

</div>

I am able to make a serial connection with a serial debugger. The SARA-R4 bd acknowledges at most one character at a time and then ignores the remaining. It is not possible to send AT commands because of this. I follo…

---

## [Searching for Occasion Bluetooth Mate Gold or Silver Modules](https://community.sparkfun.com/t/searching-for-occasion-bluetooth-mate-gold-or-silver-modules/65840)

<div class="topic-metadata">

**Author:** [@Datatron](https://community.sparkfun.com/u/Datatron)\
**Replies:** 4\
**Last updated:** [July 2, 2025, 6:08am UTC](https://community.sparkfun.com/t/searching-for-occasion-bluetooth-mate-gold-or-silver-modules/65840 "2025-07-02T06:08:04Z")

</div>

Because of BIG BlueSMiRF v2 Problems, i need 2-3 Bluetooth Mate Gold or Silver Modules.

---

## [Socket.io client with aw-cu488](https://community.sparkfun.com/t/socket-io-client-with-aw-cu488/65818)

<div class="topic-metadata">

**Author:** [@karishuma70](https://community.sparkfun.com/u/karishuma70)\
**Replies:** 1\
**Last updated:** [July 1, 2025, 6:04am UTC](https://community.sparkfun.com/t/socket-io-client-with-aw-cu488/65818 "2025-07-01T06:04:28Z")

</div>

I’m trying to implement a socket.io client in aw-cu488. What library should I use? I can’t find much information about it.

---

## [BlueSMiRF v2 not entering command mode from laptop](https://community.sparkfun.com/t/bluesmirf-v2-not-entering-command-mode-from-laptop/65750)

<div class="topic-metadata">

**Author:** [@teberle](https://community.sparkfun.com/u/teberle)\
**Replies:** 0\
**Last updated:** [June 26, 2025, 7:34pm UTC](https://community.sparkfun.com/t/bluesmirf-v2-not-entering-command-mode-from-laptop/65750 "2025-06-26T19:34:28Z")

</div>

Hello! I am trying to get accustomed to how the bluesmirf v2 works by connecting it to my laptop over bluetooth. I am able to get the bluetooth connection (solid green light), but I don’t see any response from my comman…

---

## [AWS IoT ExpressLink SARA-R5 Starter Kit V2 can't connect to the LTE](https://community.sparkfun.com/t/aws-iot-expresslink-sara-r5-starter-kit-v2-cant-connect-to-the-lte/65721)

<div class="topic-metadata">

**Author:** [@caffrey9307](https://community.sparkfun.com/u/caffrey9307)\
**Replies:** 0\
**Last updated:** [June 26, 2025, 3:14am UTC](https://community.sparkfun.com/t/aws-iot-expresslink-sara-r5-starter-kit-v2-cant-connect-to-the-lte/65721 "2025-06-26T03:14:29Z")

</div>

I activated the SIM that came along in the dev kit and tried hard to connect but still ended up with ERR14 2 UNABLE TO CONNECT. I did set the device data endpoint and APN into it. Is there anything that I have missed?

---

## [UHF M7E Hecto Module](https://community.sparkfun.com/t/uhf-m7e-hecto-module/65598)

<div class="topic-metadata">

**Author:** [@pratikpanchal44](https://community.sparkfun.com/u/pratikpanchal44)\
**Replies:** 1\
**Last updated:** [June 19, 2025, 9:50am UTC](https://community.sparkfun.com/t/uhf-m7e-hecto-module/65598 "2025-06-19T09:50:28Z")

</div>

I am using M7E-hecto module for UHF tag scanning for that I am taking reference of this. GitHub - sparkfun/SparkFun\_Simultaneous\_RFID\_Tag\_Reader\_Library: Arduino library to control the M6E-Nano RFID module from ThingMagi…

---

## [Antenna tuning for IN100 NanoBeacon dev board](https://community.sparkfun.com/t/antenna-tuning-for-in100-nanobeacon-dev-board/65418)

<div class="topic-metadata">

**Author:** [@jlmontie](https://community.sparkfun.com/u/jlmontie)\
**Replies:** 1\
**Last updated:** [June 7, 2025, 11:28am UTC](https://community.sparkfun.com/t/antenna-tuning-for-in100-nanobeacon-dev-board/65418 "2025-06-07T11:28:29Z")

</div>

I’m evaluating the IN100 Nanobeacon development board and have encountered unexpected signal degradation during line-of-sight range testing. Specifically, the RSSI drops below -90 dBm at distances under 50 feet, despite …

---

## [Sparkfun IoT Node for LoRaWAN don't connect to Chirpstack](https://community.sparkfun.com/t/sparkfun-iot-node-for-lorawan-dont-connect-to-chirpstack/65272)

<div class="topic-metadata">

**Author:** [@egarciag](https://community.sparkfun.com/u/egarciag)\
**Replies:** 3\
**Last updated:** [May 29, 2025, 10:39pm UTC](https://community.sparkfun.com/t/sparkfun-iot-node-for-lorawan-dont-connect-to-chirpstack/65272 "2025-05-29T22:39:36Z")

</div>

Hi!, I have a Sparkfun IoT Node for LoRaWAN board with an XBee module and I am trying to get it to connect to the Chirpstack that I have running on a Linux docker instance through a Kerlink Wirnet iFemtoCell Gateway. T…

---

## [SARA R5 function board appears to hang after an unpredictable amount of time](https://community.sparkfun.com/t/sara-r5-function-board-appears-to-hang-after-an-unpredictable-amount-of-time/46828)

<div class="topic-metadata">

**Author:** [@DougMcK](https://community.sparkfun.com/u/DougMcK)\
**Replies:** 8\
**Last updated:** [May 29, 2025, 4:35pm UTC](https://community.sparkfun.com/t/sara-r5-function-board-appears-to-hang-after-an-unpredictable-amount-of-time/46828 "2025-05-29T16:35:25Z")

</div>

I’ve been experimenting with the SARA R5 using both LTE and GPS functionality. At unpredictable intervals (about a day or so) the board becomes unresponsive to commands over UART. The problem is sufficiently rare that d…

---

## [Sara R5 sending https post example?](https://community.sparkfun.com/t/sara-r5-sending-https-post-example/64767)

<div class="topic-metadata">

**Author:** [@tyrian869](https://community.sparkfun.com/u/tyrian869)\
**Replies:** 2\
**Last updated:** [May 29, 2025, 8:24pm UTC](https://community.sparkfun.com/t/sara-r5-sending-https-post-example/64767 "2025-05-29T20:24:18Z")

</div>

I have a simple question for yeah, It’s regarding how to send HTTPS Post command using SaraR5? + Esp32. As I have not been able to find any solid info on how to do this, would anyone be able to help me with this possibil…

---

## [What happened to the original hookup pages for the WRL-10534](https://community.sparkfun.com/t/what-happened-to-the-original-hookup-pages-for-the-wrl-10534/64404)

<div class="topic-metadata">

**Author:** [@doctorwho8](https://community.sparkfun.com/u/doctorwho8)\
**Replies:** 2\
**Last updated:** [May 28, 2025, 6:24pm UTC](https://community.sparkfun.com/t/what-happened-to-the-original-hookup-pages-for-the-wrl-10534/64404 "2025-05-28T18:24:56Z")

</div>

Hello! Just before the site got switched, that part had an amazingly well written write-up documenting the methods behind how to connect it to an Arduino, (it showed a Redboard). Including how to wire it and program it …

---

## [NanoBeacon IN100 LE Coded PHY issue](https://community.sparkfun.com/t/nanobeacon-in100-le-coded-phy-issue/65263)

<div class="topic-metadata">

**Author:** [@Nishanth\_Shetty\_KM](https://community.sparkfun.com/u/Nishanth_Shetty_KM)\
**Replies:** 1\
**Last updated:** [May 27, 2025, 7:35am UTC](https://community.sparkfun.com/t/nanobeacon-in100-le-coded-phy-issue/65263 "2025-05-27T07:35:34Z")

</div>

I am working on a project using the SparkFun NanoBeacon IN100 and attempting to configure it for Bluetooth 5.x LE Coded PHY advertising to leverage its long-range capabilities. However, I am encountering issues where the…

---

## [How to use Apple Watch as the receiver of MyoWare 2.0 Wireless Shield](https://community.sparkfun.com/t/how-to-use-apple-watch-as-the-receiver-of-myoware-2-0-wireless-shield/61004)

<div class="topic-metadata">

**Author:** [@Joy](https://community.sparkfun.com/u/Joy)\
**Replies:** 2\
**Last updated:** [October 3, 2024, 2:12pm UTC](https://community.sparkfun.com/t/how-to-use-apple-watch-as-the-receiver-of-myoware-2-0-wireless-shield/61004 "2024-10-03T14:12:00Z")

</div>

Can MyoWare 2.0 Wireless Shield connect with apple watch directly? I want to use apple watch as a receiver. Thanks.

[Previous page](https://community.sparkfun.com/c/wireless-iot/81.md)

[Next page](https://community.sparkfun.com/c/wireless-iot/81.md?page=2)
