# Adding CAN transceiver to Teensy 3.6

**URL:** <https://community.sparkfun.com/t/adding-can-transceiver-to-teensy-3-6/34019>\
**Category:** Projects\
**Created:** [February 23, 2017, 4:14pm UTC](https://community.sparkfun.com/t/adding-can-transceiver-to-teensy-3-6/34019 "2017-02-23T16:14:32Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![digysol](https://avatars.discourse-cdn.com/v4/letter/d/8dc957/32.png) [@digysol](https://community.sparkfun.com/u/digysol)\
**Post date:** [February 23, 2017, 4:14pm UTC](https://community.sparkfun.com/t/adding-can-transceiver-to-teensy-3-6/34019/1 "2017-02-23T16:14:32Z")

</div>

I will like to connect a CAN Transceiver PCB using the Microchip MCP2551 (or reasonable equivalent) to a Teensy 3.6 in a breadboard just using jumpers. No soldering.

Looking for recommendations on a COTS (Commercial Off-the-shelf) CAN Transceiver PCB’s to accomplish this.