# Alternating 3 LED project

**URL:** <https://community.sparkfun.com/t/alternating-3-led-project/35916>\
**Category:** Projects\
**Created:** [October 8, 2018, 8:12pm UTC](https://community.sparkfun.com/t/alternating-3-led-project/35916 "2018-10-08T20:12:09Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![exeng](https://avatars.discourse-cdn.com/v4/letter/e/3da27b/32.png) [@exeng](https://community.sparkfun.com/u/exeng)\
**Post date:** [October 12, 2018, 12:56am UTC](https://community.sparkfun.com/t/alternating-3-led-project/35916/4 "2018-10-12T00:56:36Z")

</div>

Following up on my previous post… also look at figure 11 where reset is used to sequence only a subset of the 10 outputs. In your case 3 for equal on times.

---

_[View the full topic](https://community.sparkfun.com/t/alternating-3-led-project/35916)._