# BatchPCB bug? **URL:** \ **Category:** PCB Design\ **Created:** [March 14, 2009, 4:12pm UTC](https://community.sparkfun.com/t/batchpcb-bug/10442 "2009-03-14T16:12:03Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![inventore123](https://avatars.discourse-cdn.com/v4/letter/i/b9bd4f/32.png) [@inventore123](https://community.sparkfun.com/u/inventore123)\ **Post date:** [March 14, 2009, 4:12pm UTC](https://community.sparkfun.com/t/batchpcb-bug/10442/1 "2009-03-14T16:12:03Z")
This is the first time I use the BatchPCB service (but not the first time I draw a PCB). Anyway the gerber files pass the BOT, but the image rendered by the BOT seems wrong. It looks like the silkscreen is missing and soldermask is shown as if it was the silkscreen. This is part of the image I get: [http://img24.imageshack.us/img24/7599/imageffj.png](http://img24.imageshack.us/img24/7599/imageffj.png) Compare it with the image on this other thread [viewtopic.php?t=8315&highlight=bot+image](http://forum.sparkfun.com/viewtopic.php?t=8315&highlight=bot+image) and you see the difference… Now what should I do? Email sparkfun? Order the design anyway? Thank in advance for any help. ---
**Author:** ![Doitle](https://avatars.discourse-cdn.com/v4/letter/d/a9a28c/32.png) [@Doitle](https://community.sparkfun.com/u/Doitle)\ **Post date:** [March 15, 2009, 2:45am UTC](https://community.sparkfun.com/t/batchpcb-bug/10442/2 "2009-03-15T02:45:50Z")
I have the same problem. 😕 I hope someone has an idea how to correct it. ---
**Author:** ![inventore123](https://avatars.discourse-cdn.com/v4/letter/i/b9bd4f/32.png) [@inventore123](https://community.sparkfun.com/u/inventore123)\ **Post date:** [March 16, 2009, 6:40pm UTC](https://community.sparkfun.com/t/batchpcb-bug/10442/3 "2009-03-16T18:40:36Z")
I emailed sparkfun and they answered that images are just for reference. So wrong layers in the image does not mean that soldermask and silkscreen will be swapped on the board. 😛