# board not detected **URL:** \ **Category:** Artemis\ **Created:** [December 10, 2020, 10:11am UTC](https://community.sparkfun.com/t/board-not-detected/41076 "2020-12-10T10:11:44Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![gDFfRc7VvzfYydHP](https://avatars.discourse-cdn.com/v4/letter/g/71c47a/32.png) [@gDFfRc7VvzfYydHP](https://community.sparkfun.com/u/gDFfRc7VvzfYydHP)\ **Post date:** [December 10, 2020, 10:11am UTC](https://community.sparkfun.com/t/board-not-detected/41076/1 "2020-12-10T10:11:44Z")
Hi, I am on Linux (Ubuntu 20.04). I followed the instructions available here: [https://learn.sparkfun.com/tutorials/ar … s-beta/all](https://learn.sparkfun.com/tutorials/artemis-development-on-arm-mbed-os-beta/all) - I installed the latest mbed-studio version (v 1.3.1), including the udev rules setup - I cloned the sparkfun mbed repo, checked it out in the right version, and use it within mbed-studio I am then able to compile the blink example for the Artemis DK, but for some reason the “connect to a platform” button is greyed out, and I cannot find the board in the Target section (see screenshot). - Any idea why this happens / how to fix? - Can this be due to DAP versions? [https://armmbed.github.io/DAPLink/](https://armmbed.github.io/DAPLink/) - I think the board is well recognized by the computer (just FYI, dmesg output): ```auto [4745.664488] usb 1-1: new full-speed USB device number 12 using xhci_hcd [4745.814585] usb 1-1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.64 [4745.814592] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [4745.814596] usb 1-1: Product: USB Serial [4745.816998] ch341 1-1:1.0: ch341-uart converter detected [4745.818249] usb 1-1: ch341-uart converter now attached to ttyUSB0 ``` ---
**Author:** ![gDFfRc7VvzfYydHP](https://avatars.discourse-cdn.com/v4/letter/g/71c47a/32.png) [@gDFfRc7VvzfYydHP](https://community.sparkfun.com/u/gDFfRc7VvzfYydHP)\ **Post date:** [December 10, 2020, 10:15am UTC](https://community.sparkfun.com/t/board-not-detected/41076/2 "2020-12-10T10:15:54Z")
Screenshot: as you see, was able to build, but cannot upload. ![Screenshot from 2020-12-10 10-41-32.png](https://canada1.discourse-cdn.com/sparkfun/original/3X/5/c/5c28f4eb8193d3f56cf9526ae75f8ebac3330a91.png) ---
**Author:** ![Karrde](https://avatars.discourse-cdn.com/v4/letter/k/c0e974/32.png) [@Karrde](https://community.sparkfun.com/u/Karrde)\ **Post date:** [January 24, 2021, 5:28am UTC](https://community.sparkfun.com/t/board-not-detected/41076/3 "2021-01-24T05:28:53Z")
I have the same issue: - - Artemis Nano - - Windows 10 - - Mbed Studio 1.3.1 - - ![mbed tools.png|413x425](upload://fO8flOlyAPDZQANBojfufQcfGGq.png) ---
**Author:** ![Karrde](https://avatars.discourse-cdn.com/v4/letter/k/c0e974/32.png) [@Karrde](https://community.sparkfun.com/u/Karrde)\ **Post date:** [January 24, 2021, 10:56am UTC](https://community.sparkfun.com/t/board-not-detected/41076/4 "2021-01-24T10:56:04Z")
When I begin compiling with an SFE\_ARTEMIS target, I get the following lines: Configuration error: Bootloader not supported on this target. ROM start not found in targets.json. Configuration error: Bootloader not supported on this target. RAM start not found in targets.json. ---
**Author:** ![gDFfRc7VvzfYydHP](https://avatars.discourse-cdn.com/v4/letter/g/71c47a/32.png) [@gDFfRc7VvzfYydHP](https://community.sparkfun.com/u/gDFfRc7VvzfYydHP)\ **Post date:** [January 24, 2021, 8:46pm UTC](https://community.sparkfun.com/t/board-not-detected/41076/5 "2021-01-24T20:46:54Z")
Small side note: I was looking into MBedStudio a few weeks ago as I could not get the “Arduino MbeOS Sparkfun core” to work. But it has got much better recently, so now the code there: [https://github.com/sparkfun/Arduino\_Apollo3](https://github.com/sparkfun/Arduino_Apollo3) Together possibly with the Platformio core here: [https://github.com/nigelb/platform-apol … ee/Core\_V2](https://github.com/nigelb/platform-apollo3blue/tree/Core_V2) Start to be a quite nice environment 🙂 (though there are still a few things to iron out). ---
**Author:** ![Destinee2](https://avatars.discourse-cdn.com/v4/letter/d/4491bb/32.png) [@Destinee2](https://community.sparkfun.com/u/Destinee2)\ **Post date:** [May 31, 2021, 10:55am UTC](https://community.sparkfun.com/t/board-not-detected/41076/6 "2021-05-31T10:55:29Z")
> Karrde: > I have the same issue: > > - - Artemis Nano > - - Windows 10 > - - Mbed Studio 1.3.1 > - - mbed tools.png Did you have a fix on this issue? Facing same issue but no response from anyone and couldnt find this topic troubleshooting in google. ---
**Author:** ![sparkfun\_cbauer.net](https://avatars.discourse-cdn.com/v4/letter/s/5f9b8f/32.png) [@sparkfun\_cbauer.net](https://community.sparkfun.com/u/sparkfun_cbauer.net)\ **Post date:** [July 8, 2021, 5:58pm UTC](https://community.sparkfun.com/t/board-not-detected/41076/7 "2021-07-08T17:58:48Z")
I’m having the same issue with Mbed Studio 1.4.1/ Did anyone ever find a solution to this?