# confusion re. TF mini

**URL:** <https://community.sparkfun.com/t/confusion-re-tf-mini/40681>\
**Category:** Distance\
**Created:** [October 17, 2020, 3:39pm UTC](https://community.sparkfun.com/t/confusion-re-tf-mini/40681 "2020-10-17T15:39:20Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![zoid](https://avatars.discourse-cdn.com/v4/letter/z/bc79bd/32.png) [@zoid](https://community.sparkfun.com/u/zoid)\
**Post date:** [October 17, 2020, 3:39pm UTC](https://community.sparkfun.com/t/confusion-re-tf-mini/40681/1 "2020-10-17T15:39:20Z")

</div>

looking at the data sheet for the TF midi I’m confused about setting the baud rate. H1,H2 H3 H4. What would these look like if I wanted to change the baud rate to 9600 baud?

---

<div class="post-metadata">

**Author:** ![YellowDog](https://yyz1.discourse-cdn.com/sparkfun/user_avatar/community.sparkfun.com/yellowdog/32/1782_2.png) [@YellowDog](https://community.sparkfun.com/u/YellowDog)\
**Post date:** [October 19, 2020, 5:04pm UTC](https://community.sparkfun.com/t/confusion-re-tf-mini/40681/2 "2020-10-19T17:04:25Z")

</div>

Which TF Mini?

Sparkfun has like 4 of them.

---

<div class="post-metadata">

**Author:** ![grist](https://yyz1.discourse-cdn.com/sparkfun/user_avatar/community.sparkfun.com/grist/32/542_2.png) [@grist](https://community.sparkfun.com/u/grist)\
**Post date:** [October 20, 2020, 6:44am UTC](https://community.sparkfun.com/t/confusion-re-tf-mini/40681/3 "2020-10-20T06:44:00Z")

</div>

There is example code for setting the baud rate here: [https://github.com/TFmini/TFminiPlus-Ar … aud\_EN.ino](https://github.com/TFmini/TFminiPlus-Arduino/blob/master/Example-SetCommand/TFmini_PLUS_Setbaud_EN/TFmini_PLUS_Setbaud_EN.ino)

\*disclaimer, I haven’t tried it