# development board layout

**URL:** <https://community.sparkfun.com/t/development-board-layout/203>\
**Category:** New Product Ideas\
**Created:** [October 23, 2004, 6:03pm UTC](https://community.sparkfun.com/t/development-board-layout/203 "2004-10-23T18:03:03Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/sparkfun/original/2X/d/d19eb507aca5e19aadba71e3743536c935c64e77.svg) [@system](https://community.sparkfun.com/u/system)\
**Post date:** [October 23, 2004, 6:03pm UTC](https://community.sparkfun.com/t/development-board-layout/203/1 "2004-10-23T18:03:03Z")

</div>

Development boards should be made to work with a solderless breadboard. That way it would be reuseable rather than one shot. Female solderless breadboard parts should be allong both sides of the chip then the user can plug in led’s to debug their project.