# Eagle DRC file for SFE

**URL:** <https://community.sparkfun.com/t/eagle-drc-file-for-sfe/912>\
**Category:** BatchPCB\
**Created:** [September 19, 2005, 5:19pm UTC](https://community.sparkfun.com/t/eagle-drc-file-for-sfe/912 "2005-09-19T17:19:59Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![spamiam](https://avatars.discourse-cdn.com/v4/letter/s/74df32/32.png) [@spamiam](https://community.sparkfun.com/u/spamiam)\
**Post date:** [September 19, 2005, 5:19pm UTC](https://community.sparkfun.com/t/eagle-drc-file-for-sfe/912/1 "2005-09-19T17:19:59Z")

</div>

Is there an Eagle DRC file available customized to the specifics of the Sparkfun PCB deal? I have entered 8 min minimum trace width and spacing, 20min minimum hole (I assume vias too), but it seems there are other settings I can/should use in the DRC file.

So, I would love it if there were a pre-packaged custom DRC file specifically tailored to the needs of the SFE PCB deal. Is there such a thing?

-Tony