Here’s what I get, I hope that helps
brfindla@LinuxAtom:~/dev/linux$ openocd
Open On-Chip Debugger 0.2.0 (2009-08-10-12:31) Release
$URL: http://svn.berlios.de/svnroot/repos/ope … /openocd.c $
For bug reports, read http://svn.berlios.de/svnroot/repos/openocd/trunk/BUGS
Info : J-Link initialization started / target CPU reset initiated
Error: J-Link command 0xde failed (-1)
Error: J-Link command 0xdc failed (-1)
Error: J-Link command 0x01 failed (-1)
Error: J-Link command EMU_CMD_VERSION failed (-1)
Info : J-Link JTAG Interface ready
Error: J-Link command 0xdd failed (-1)
Error: J-Link command 0xdf failed (-1)
Error: J-Link setting speed failed (-1)
Error: usb_bulk_write failed (requested=6, result=-1)
Error: jlink_tap_execute, wrong result -107 (expected 1)
Error: usb_bulk_write failed (requested=6, result=-1)
Error: jlink_tap_execute, wrong result -107 (expected 1)
Error: J-Link command 0xdd failed (-1)
Error: J-Link command 0xde failed (-1)
Error: J-Link command 0xdc failed (-1)
Error: J-Link command 0xde failed (-1)
Error: J-Link command 0xdc failed (-1)
Error: J-Link command 0xdf failed (-1)
Error: usb_bulk_write failed (requested=6, result=-1)
Error: jlink_tap_execute, wrong result -107 (expected 1)
Error: J-Link command 0xdd failed (-1)
Error: J-Link command 0xdf failed (-1)
Error: usb_bulk_write failed (requested=6, result=-1)
Error: jlink_tap_execute, wrong result -107 (expected 1)
Error: usb_bulk_write failed (requested=6, result=-1)
Error: jlink_tap_execute, wrong result -107 (expected 1)