# Fritzing PCB  Foot Print for Thing Plus

**URL:** <https://community.sparkfun.com/t/fritzing-pcb-foot-print-for-thing-plus/42439>\
**Category:** PCB Design\
**Created:** [July 15, 2021, 6:08pm UTC](https://community.sparkfun.com/t/fritzing-pcb-foot-print-for-thing-plus/42439 "2021-07-15T18:08:48Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ke6pi\_cox.net](https://avatars.discourse-cdn.com/v4/letter/k/e274bd/32.png) [@ke6pi\_cox.net](https://community.sparkfun.com/u/ke6pi_cox.net)\
**Post date:** [July 15, 2021, 6:08pm UTC](https://community.sparkfun.com/t/fritzing-pcb-foot-print-for-thing-plus/42439/1 "2021-07-15T18:08:48Z")

</div>

I’m fritzing a PCB that incorporates an ESP32 Thing Plus WRL-17381 and found there are no Sparkfun Fritzing foot print for any Thing Plus part. The WRL-17381 write-up suggest that the part is consistent with adafruit feather format, but when I insert their Fritzing part the result is always too small. I have looked at Sparkfun’s Eagle file for the part but the result is too complex for me to incorporate it into my home version of Eagle. Do you have a suggestion as to how I might incorporate WRL-17381 into a PCB.

Thank you. Rod

---

<div class="post-metadata">

**Author:** ![ke6pi\_cox.net](https://avatars.discourse-cdn.com/v4/letter/k/e274bd/32.png) [@ke6pi\_cox.net](https://community.sparkfun.com/u/ke6pi_cox.net)\
**Post date:** [July 15, 2021, 6:34pm UTC](https://community.sparkfun.com/t/fritzing-pcb-foot-print-for-thing-plus/42439/2 "2021-07-15T18:34:28Z")

</div>

After I submitted my request I did find the foot print for WRL 14689 which looks like a Thing Plus.