# From where to get a MagJack PoE compatible connector?

**URL:** <https://community.sparkfun.com/t/from-where-to-get-a-magjack-poe-compatible-connector/29794>\
**Category:** PCB Design\
**Created:** [November 13, 2014, 10:58pm UTC](https://community.sparkfun.com/t/from-where-to-get-a-magjack-poe-compatible-connector/29794 "2014-11-13T22:58:53Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![flavius.stoichescu](https://avatars.discourse-cdn.com/v4/letter/f/e8c25b/32.png) [@flavius.stoichescu](https://community.sparkfun.com/u/flavius.stoichescu)\
**Post date:** [November 13, 2014, 10:58pm UTC](https://community.sparkfun.com/t/from-where-to-get-a-magjack-poe-compatible-connector/29794/1 "2014-11-13T22:58:53Z")

</div>

Hello, I have a small project for a friend that needed a RFID reader with Ethernet and one cable connecting the little thing. I used the SparkFun PoEthernet Shield (DEV-10864) schematics, changed the passives to more solder-able smds, added everything needed for an Arduino Pro Mini and ID-12 RFID module, ordered the PCB and all the components but now I can’t find the MagJack PoE compatible connector.

From the pictures of the SparkFun shield and much google-ing I found that the one used is the HR931147C from HanRun. Can anybody please tell me from where could I get this connector? Or something with the same pin-out? The MagJack on the SparkFun shop (which I initially ordered) is not PoE compatible (and I only later realized the difference since I’m a noob when it comes to Ethernet), and since I have already made the PCB and practically soldered everything, I can’t use another connector but the one used by the shield.

Thank you very much for your help.