# gm862 usb evaluation board python

**URL:** <https://community.sparkfun.com/t/gm862-usb-evaluation-board-python/9253>\
**Category:** Wireless & IoT\
**Created:** [December 3, 2008, 4:54am UTC](https://community.sparkfun.com/t/gm862-usb-evaluation-board-python/9253 "2008-12-03T04:54:47Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![bilgun](https://avatars.discourse-cdn.com/v4/letter/b/8e7dd6/32.png) [@bilgun](https://community.sparkfun.com/u/bilgun)\
**Post date:** [December 3, 2008, 4:54am UTC](https://community.sparkfun.com/t/gm862-usb-evaluation-board-python/9253/1 "2008-12-03T04:54:47Z")

</div>

is gm862 Evaluation Board-USB(CEL-00281) possible to download the python script to module?

if so where can i find any step by step instruction to download the script to

module from Telit Python 1.5.2+ Package. easy python script document doesnt contain enough info about those.

---

<div class="post-metadata">

**Author:** ![Symmetry\_TME](https://avatars.discourse-cdn.com/v4/letter/s/e99b99/32.png) [@Symmetry\_TME](https://community.sparkfun.com/u/Symmetry_TME)\
**Post date:** [March 6, 2009, 1:11am UTC](https://community.sparkfun.com/t/gm862-usb-evaluation-board-python/9253/2 "2009-03-06T01:11:13Z")

</div>

Hello,

I am an apps engineer and the main product line I support is Telit.

There are some great documents here for working with Python when using the GM862: [http://www.semiconductorstore.com/cart/ … duct=42895](http://www.semiconductorstore.com/cart/pc/viewPrd.asp?idproduct=42895)

Also, if you have specific questions, feel free to PM me and I will do my best to assist.

Good Luck.

-Brian

---

<div class="post-metadata">

**Author:** ![bilgun](https://avatars.discourse-cdn.com/v4/letter/b/8e7dd6/32.png) [@bilgun](https://community.sparkfun.com/u/bilgun)\
**Post date:** [March 6, 2009, 2:47pm UTC](https://community.sparkfun.com/t/gm862-usb-evaluation-board-python/9253/3 "2009-03-06T14:47:18Z")

</div>

thanks for replying. i succeeded with downloading my python script and now its working fine. but also some have some problem. first “at#sgact” command doesnt works and instead i’m using “at#sktd” and its wokring. although i prefer “at#sgact” and “at#sd” . of course these are working correctly by at command control from pc. and next prblem is my python script works whether dtr is high or low. of course i configured at#startmodescr.