# Is this type of board possible?

**URL:** <https://community.sparkfun.com/t/is-this-type-of-board-possible/17479>\
**Category:** BatchPCB\
**Created:** [September 23, 2010, 11:21am UTC](https://community.sparkfun.com/t/is-this-type-of-board-possible/17479 "2010-09-23T11:21:33Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![rp181](https://avatars.discourse-cdn.com/v4/letter/r/e8c25b/32.png) [@rp181](https://community.sparkfun.com/u/rp181)\
**Post date:** [September 23, 2010, 11:21am UTC](https://community.sparkfun.com/t/is-this-type-of-board-possible/17479/1 "2010-09-23T11:21:33Z")

</div>

Is this type of board, with half cut plated holes, possible with batch?

![](http://www.vectornav.com/images/vn100/vn100_coin.jpg)[http://www.vectornav.com/images/vn100/vn100\_coin.jpg](http://www.vectornav.com/images/vn100/vn100_coin.jpg)

---

<div class="post-metadata">

**Author:** ![rosele](https://avatars.discourse-cdn.com/v4/letter/r/2bfe46/32.png) [@rosele](https://community.sparkfun.com/u/rosele)\
**Post date:** [September 27, 2010, 3:53am UTC](https://community.sparkfun.com/t/is-this-type-of-board-possible/17479/2 "2010-09-27T03:53:45Z")

</div>

I know one pcb FAB house can do it, not sure about Batchpcb though.

---

<div class="post-metadata">

**Author:** ![n1ist](https://avatars.discourse-cdn.com/v4/letter/n/5daacb/32.png) [@n1ist](https://community.sparkfun.com/u/n1ist)\
**Post date:** [September 28, 2010, 7:51pm UTC](https://community.sparkfun.com/t/is-this-type-of-board-possible/17479/3 "2010-09-28T19:51:09Z")

</div>

They are called “castellations”.

/mike