# JetBot IMG + Sparkfun Mods = No OLED

**URL:** <https://community.sparkfun.com/t/jetbot-img-sparkfun-mods-no-oled/38347>\
**Category:** Kits\
**Created:** [December 2, 2019, 3:28pm UTC](https://community.sparkfun.com/t/jetbot-img-sparkfun-mods-no-oled/38347 "2019-12-02T15:28:04Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![dennisfaucher](https://yyz1.discourse-cdn.com/sparkfun/user_avatar/community.sparkfun.com/dennisfaucher/32/2623_2.png) [@dennisfaucher](https://community.sparkfun.com/u/dennisfaucher)\
**Post date:** [December 2, 2019, 3:28pm UTC](https://community.sparkfun.com/t/jetbot-img-sparkfun-mods-no-oled/38347/1 "2019-12-02T15:28:04Z")

</div>

Hello,

I was using the Sparkfun JetBot image on my SparkBot until I got to the object\_following phase where I realized that the version of TensorRT in the SparkBot image was incompatible (5.1 versus 5.0). I burned the NVIDIA JetBot image instead, unzipped the Sparkfun jetbot.zip to replace the jetbot folder, ran “sudo python3 setup.py install”, rebooted, but no OLED. The OLED was working fine with the Sparkfun image. stats.py is running. Any ideas? TIA.

---

<div class="post-metadata">

**Author:** ![santaimpersonator](https://yyz1.discourse-cdn.com/sparkfun/user_avatar/community.sparkfun.com/santaimpersonator/32/6108_2.png) [@santaimpersonator](https://community.sparkfun.com/u/santaimpersonator)\
**Post date:** [March 5, 2020, 10:11pm UTC](https://community.sparkfun.com/t/jetbot-img-sparkfun-mods-no-oled/38347/2 "2020-03-05T22:11:07Z")

</div>

I think you already figured it out from this other post: [viewtopic.php?f=88&t=51553&p=213066#p213066](https://forum.sparkfun.com/viewtopic.php?f=88&t=51553&p=213066#p213066)

For anyone else seeing this… I probably forgot to add instructions for installing the Qwiic package. There should be a note there now.