# LPC-P2129 setup help

**URL:** <https://community.sparkfun.com/t/lpc-p2129-setup-help/1436>\
**Category:** MicroMod\
**Tags:** arm-lpc\
**Created:** [February 23, 2006, 8:18am UTC](https://community.sparkfun.com/t/lpc-p2129-setup-help/1436 "2006-02-23T08:18:25Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![giorig2004](https://avatars.discourse-cdn.com/v4/letter/g/ac91a4/32.png) [@giorig2004](https://community.sparkfun.com/u/giorig2004)\
**Post date:** [February 23, 2006, 8:18am UTC](https://community.sparkfun.com/t/lpc-p2129-setup-help/1436/1 "2006-02-23T08:18:25Z")

</div>

It is the first time that i try to work with ARM.

I have a LPC-P2129 board, IAR ARM 4.31a C Compiler and Philips LPC2000 flash utility.

I tried to test the blink leds example on OLIMEX site but with no success!

The flash utility seem to work: it can read the chip ID and upload the hex file (intel extended .a79 format from iar linker)

May be I don’t use the right option on compiler… or I miss something else…

Can somebody help me?

Thanks

---

<div class="post-metadata">

**Author:** ![giorig2004](https://avatars.discourse-cdn.com/v4/letter/g/ac91a4/32.png) [@giorig2004](https://community.sparkfun.com/u/giorig2004)\
**Post date:** [February 24, 2006, 3:34pm UTC](https://community.sparkfun.com/t/lpc-p2129-setup-help/1436/2 "2006-02-24T15:34:49Z")

</div>

Solved!

The Olimex LPC-P2129 manage only partially the Philips LPC2000 Flash Utility mechanism to enter in Serial Progamming!..

It need to remove the BSL jumper after programming!