# Olimex arm-usb-ocd + olimex Sam7La2 config.

**URL:** <https://community.sparkfun.com/t/olimex-arm-usb-ocd-olimex-sam7la2-config/6346>\
**Category:** MicroMod\
**Tags:** arm-lpc\
**Created:** [January 31, 2008, 9:33pm UTC](https://community.sparkfun.com/t/olimex-arm-usb-ocd-olimex-sam7la2-config/6346 "2008-01-31T21:33:37Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![micro133](https://avatars.discourse-cdn.com/v4/letter/m/9e8a1a/32.png) [@micro133](https://community.sparkfun.com/u/micro133)\
**Post date:** [January 31, 2008, 9:33pm UTC](https://community.sparkfun.com/t/olimex-arm-usb-ocd-olimex-sam7la2-config/6346/1 "2008-01-31T21:33:37Z")

</div>

Hi All !

Could someone ensure me that openocd will work with AT91SAM7A2 ?

It have no IFlash and only 16KB IRAM.

I work with olimex sam7la2 board but after i get in to the ocd shell (by telnet) and type reset, ocd tells me that micro is in halted state, but it is running pre-programmed(by olimex) test app.

What can be the reason ?