# OLIMEX EP9302 heart bit

**URL:** <https://community.sparkfun.com/t/olimex-ep9302-heart-bit/9475>\
**Category:** MicroMod\
**Tags:** arm-lpc\
**Created:** [December 26, 2008, 8:55pm UTC](https://community.sparkfun.com/t/olimex-ep9302-heart-bit/9475 "2008-12-26T20:55:46Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![mehmet](https://avatars.discourse-cdn.com/v4/letter/m/b4bc9f/32.png) [@mehmet](https://community.sparkfun.com/u/mehmet)\
**Post date:** [December 26, 2008, 8:55pm UTC](https://community.sparkfun.com/t/olimex-ep9302-heart-bit/9475/1 "2008-12-26T20:55:46Z")

</div>

Hi All,

I have purchased a EP9302 board from olimex. I can not get any response from the board. Is there anyway that I can understand board is functioning at all.

Thanks,

---

<div class="post-metadata">

**Author:** ![fritz99](https://avatars.discourse-cdn.com/v4/letter/f/3ab097/32.png) [@fritz99](https://community.sparkfun.com/u/fritz99)\
**Post date:** [December 28, 2008, 7:53am UTC](https://community.sparkfun.com/t/olimex-ep9302-heart-bit/9475/2 "2008-12-28T07:53:04Z")

</div>

I would connect a serial cable to the serial connector of the board and my PC/Mac. Connection Speed is 57600 8N1. If you have the right cable you should see the boot messages…

If you don’t se anything you should check settings and the cable

Cable is a null modem cable

PIN2 – PIN3 (RxD – TxD)

PIN3 – PIN2 (TxD – RxD)

PIN5 – PIN5 (Gnd – Gnd)

Regards, f.

---

<div class="post-metadata">

**Author:** ![mehmet](https://avatars.discourse-cdn.com/v4/letter/m/b4bc9f/32.png) [@mehmet](https://community.sparkfun.com/u/mehmet)\
**Post date:** [December 29, 2008, 6:21pm UTC](https://community.sparkfun.com/t/olimex-ep9302-heart-bit/9475/3 "2008-12-29T18:21:57Z")

</div>

Thanks for the help but I do not get any response. Do you know how can I flash bootrom?