# openOCD-Olimex ARM-USB-TINY-STM32-H103 **URL:** \ **Category:** MicroMod\ **Tags:** arm-lpc\ **Created:** [March 20, 2009, 2:26pm UTC](https://community.sparkfun.com/t/openocd-olimex-arm-usb-tiny-stm32-h103/10515 "2009-03-20T14:26:55Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![bubi](https://avatars.discourse-cdn.com/v4/letter/b/51bf81/32.png) [@bubi](https://community.sparkfun.com/u/bubi)\ **Post date:** [March 20, 2009, 2:26pm UTC](https://community.sparkfun.com/t/openocd-olimex-arm-usb-tiny-stm32-h103/10515/1 "2009-03-20T14:26:55Z")
Hello, As you can see here [viewtopic.php?t=14650](http://forum.sparkfun.com/viewtopic.php?t=14650), i had problems using Crossworks and its debugger. Now i switched sucessfully to Eclipse+openOCD to flash and debug. First evening everything was OK, but now it doesn’t. First here is the Log ```auto 500 kHz Info : JTAG tap: stm32.cpu tap/device found: 0x3ba00477 (Manufacturer: 0x23b, Part: 0xba00, Version: 0x3) Info : JTAG Tap/device matched Info : JTAG tap: stm32.bs tap/device found: 0x16410041 (Manufacturer: 0x020, Part: 0x6410, Version: 0x1) Info : JTAG Tap/device matched Warn : no telnet port specified, using default port 4444 Warn : no gdb port specified, using default port 3333 Warn : no tcl port specified, using default port 6666 Info : accepting 'gdb' connection from 0 Warn : target was in unknown state when halt was requested Warn : acknowledgment received, but no packet pending Info : device id = 0x20036410 Info : flash size = 128kbytes cortex_m3 interrupt mask off Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: SWJ-DP STICKY ERROR Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: BUG: Why does this fail the first time???? Error: dcb_dhcsr 0x0, nvic_shcsr 0x0, nvic_cfsr 0x0, nvic_bfar 0x20004fdc ``` My GDB init ```auto target extended-remote localhost:3333 monitor debug_level 2 monitor halt load monitor cortex_m3 maskisr off thbreak main monitor debug_level 0 ``` My openocd config ```auto source [find board/stm32f10x_128k_eval.cfg] source [find interface/olimex-jtag-tiny-a.cfg] proc flash_image { filename } { # Halt CPU and flash image # reset halt flash write_image erase $filename # "reset run" doesn't work in 0.1.0.. # resume shutdown } init ``` Log of flashing a programm ```auto Warn : captured: 0x0f check_value: 0x01 check_mask: 0x0f Warn : in_handler: w/o "in_value", mismatch in SIR Error: BUG: Why does this fail the first time???? Warn : Invalid ACK in SWJDP transaction Warn : TAP stm32.cpu: Warn : value captured during scan didn't pass the requested check: Warn : captured: 0x0f check_value: 0x01 check_mask: 0x0f Warn : in_handler: w/o "in_value", mismatch in SIR Warn : TAP stm32.cpu: Warn : value captured during scan didn't pass the requested check: Warn : captured: 0x0f check_value: 0x01 check_mask: 0x0f Warn : in_handler: w/o "in_value", mismatch in SIR Error: BUG: Why does this fail the first time???? Warn : Invalid ACK in SWJDP transaction Warn : TAP stm32.cpu: Warn : value captured during scan didn't pass the requested check: Warn : captured: 0x0f check_value: 0x01 check_mask: 0x0f Warn : in_handler: w/o "in_value", mismatch in SIR Error: BUG: Why does this fail the first time???? Warn : Invalid ACK in SWJDP transaction Warn : Invalid ACK in SWJDP transaction Warn : TAP stm32.cpu: Warn : value captured during scan didn't pass the requested check: Warn : captured: 0x0f check_value: 0x01 check_mask: 0x0f Warn : in_handler: w/o "in_value", mismatch in SIR Error: BUG: Why does this fail the first time???? Warn : Invalid ACK in SWJDP transaction Warn : TAP stm32.cpu: Warn : value captured during scan didn't pass the requested check: Warn : captured: 0x0f check_value: 0x01 check_mask: 0x0f Warn : in_handler: w/o "in_value", mismatch in SIR Error: BUG: Why does this fail the first time???? Warn : Invalid ACK in SWJDP transaction Warn : TAP stm32.cpu: Warn : value captured during scan didn't pass the requested check: Warn : captured: 0x0f check_value: 0x01 check_mask: 0x0f Warn : in_handler: w/o "in_value", mismatch in SIR Warn : TAP stm32.cpu: Warn : value captured during scan didn't pass the requested check: Warn : captured: 0x0f check_value: 0x01 check_mask: 0x0f Warn : in_handler: w/o "in_value", mismatch in SIR Error: BUG: Why does this fail the first time???? target state: halted target halted due to debug-request, current mode: Thread xPSR: 0x01000000 pc: 0x08001264 auto erase enabled Info : device id = 0x20036410 Info : flash size = 128kbytes Info : Padding image section 0 with 0 bytes wrote 4896 byte from file main.elf in 0.967200s (4.943393 kb/s) ``` I think, it’s the same problem, why Crossworks hangs up. Is this a bug in the driver, in openocd or is it a hardware problem? Can anyone of you direct me to a solution? Regards Michael ---
**Author:** ![bubi](https://avatars.discourse-cdn.com/v4/letter/b/51bf81/32.png) [@bubi](https://community.sparkfun.com/u/bubi)\ **Post date:** [March 20, 2009, 3:46pm UTC](https://community.sparkfun.com/t/openocd-olimex-arm-usb-tiny-stm32-h103/10515/2 "2009-03-20T15:46:58Z")
Ok, now i can’t even connect. ```auto 10 kHz Info : JTAG tap: stm32.cpu tap/device found: 0xffa00477 (Manufacturer: 0x23b, Part: 0xfa00, Version: 0xf) Error: JTAG tap: stm32.cpu got: 0xffa00477 (mfg: 0x23b, part: 0xfa00, ver: 0xf) Error: JTAG tap: stm32.cpu expected 1 of 1: 0x3ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x3) Error: trying to validate configured JTAG chain anyway... Warn : Invalid ACK in SWJDP transaction Warn : TAP stm32.cpu: Warn : value captured during scan didn't pass the requested check: Warn : captured: 0x0f check_value: 0x01 check_mask: 0x0f Warn : in_handler: w/o "in_value", mismatch in SIR Warn : TAP stm32.cpu: Warn : value captured during scan didn't pass the requested check: Warn : captured: 0x0f check_value: 0x01 check_mask: 0x0f Warn : in_handler: w/o "in_value", mismatch in SIR Error: BUG: Why does this fail the first time???? Warn : Invalid ACK in SWJDP transaction Warn : Invalid ACK in SWJDP transaction Warn : TAP stm32.cpu: Warn : value captured during scan didn't pass the requested check: Warn : captured: 0x0f check_value: 0x01 check_mask: 0x0f Warn : in_handler: w/o "in_value", mismatch in SIR Error: BUG: Why does this fail the first time???? Warn : Invalid ACK in SWJDP transaction Warn : Block read error address 0xe000ed00, count 0x1 Warn : no telnet port specified, using default port 4444 Warn : no gdb port specified, using default port 3333 Warn : no tcl port specified, using default port 6666 Warn : TAP stm32.cpu: Warn : value captured during scan didn't pass the requested check: Warn : captured: 0x0f check_value: 0x01 check_mask: 0x0f Warn : in_handler: w/o "in_value", mismatch in SIR Warn : TAP stm32.cpu: Warn : value captured during scan didn't pass the requested check: Warn : captured: 0x0f check_value: 0x01 check_mask: 0x0f Warn : in_handler: w/o "in_value", mismatch in SIR Error: BUG: Why does this fail the first time???? Warn : Invalid ACK in SWJDP transaction Warn : TAP stm32.cpu: Warn : value captured during scan didn't pass the requested check: Warn : captured: 0x0f check_value: 0x01 check_mask: 0x0f Warn : in_handler: w/o "in_value", mismatch in SIR Error: BUG: Why does this fail the first time???? Warn : Invalid ACK in SWJDP transaction Warn : TAP stm32.cpu: Warn : value captured during scan didn't pass the requested check: Warn : captured: 0x0f check_value: 0x01 check_mask: 0x0f Warn : in_handler: w/o "in_value", mismatch in SIR Error: BUG: Why does this fail the first time???? Warn : Invalid ACK in SWJDP transaction ``` It seems it’s reading even the wrong ID :shock: maybe hardwareproblem?!