# Plastic housing on Microview

**URL:** <https://community.sparkfun.com/t/plastic-housing-on-microview/30453>\
**Category:** Microview Support\
**Created:** [March 1, 2015, 7:09am UTC](https://community.sparkfun.com/t/plastic-housing-on-microview/30453 "2015-03-01T07:09:49Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![seskindell](https://avatars.discourse-cdn.com/v4/letter/s/e19adc/32.png) [@seskindell](https://community.sparkfun.com/u/seskindell)\
**Post date:** [March 1, 2015, 7:09am UTC](https://community.sparkfun.com/t/plastic-housing-on-microview/30453/1 "2015-03-01T07:09:49Z")

</div>

Is it possible to get the Microview without the plastic housing … i.e., just the programmer circuit board and OLED?

Thank you!

- Steve

---

<div class="post-metadata">

**Author:** ![Help\_GeekAmmo](https://avatars.discourse-cdn.com/v4/letter/h/4491bb/32.png) [@Help\_GeekAmmo](https://community.sparkfun.com/u/Help_GeekAmmo)\
**Post date:** [March 8, 2015, 10:09am UTC](https://community.sparkfun.com/t/plastic-housing-on-microview/30453/2 "2015-03-08T10:09:50Z")

</div>

Hi,

If you already have the MicroView, just remove the plastic housing.

If you have custom enclosure, will you consider this [https://www.sparkfun.com/products/13003](https://www.sparkfun.com/products/13003) ? The tutorial is here

[https://learn.sparkfun.com/tutorials/mi … okup-guide](https://learn.sparkfun.com/tutorials/micro-oled-breakout-hookup-guide)

Cheers

JP