# Problem using GPRS on ADH8066

**URL:** <https://community.sparkfun.com/t/problem-using-gprs-on-adh8066/21216>\
**Category:** Wireless & IoT\
**Created:** [July 7, 2011, 1:28pm UTC](https://community.sparkfun.com/t/problem-using-gprs-on-adh8066/21216 "2011-07-07T13:28:46Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![nehalem](https://avatars.discourse-cdn.com/v4/letter/n/8e7dd6/32.png) [@nehalem](https://community.sparkfun.com/u/nehalem)\
**Post date:** [July 7, 2011, 1:28pm UTC](https://community.sparkfun.com/t/problem-using-gprs-on-adh8066/21216/1 "2011-07-07T13:28:46Z")

</div>

Hello, I have an ADH8066 which is working fine so far. My issue is pulling a web page using GPRS. I have done the following:

AT+AIPDCONT=“internet” // edited as necessary with the correct APN, username, and password

AT+AIPA=1 // at this command I as assigned a private IP in the 10._._.\* range

My provider gives me two other settings, but I’m not sure where to put them:

WAP IP 1 172.016.007.012

Wap Port 1 9201

At first I thought it was a proxy, so I attempted to pull a web page how you would do it using a HTTP proxy server. That gave a 304 socket error. So I tried to pull a webpage directly. Same 304 error.

Any ideas on how to use that IP address and port?