# Programming from Flipper Zero

**URL:** <https://community.sparkfun.com/t/programming-from-flipper-zero/46006>\
**Category:** NFC & RFID\
**Created:** [August 3, 2023, 5:17pm UTC](https://community.sparkfun.com/t/programming-from-flipper-zero/46006 "2023-08-03T17:17:26Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![UIUC\_Josh](https://avatars.discourse-cdn.com/v4/letter/u/a587f6/32.png) [@UIUC\_Josh](https://community.sparkfun.com/u/UIUC_Josh)\
**Post date:** [August 3, 2023, 5:17pm UTC](https://community.sparkfun.com/t/programming-from-flipper-zero/46006/1 "2023-08-03T17:17:26Z")

</div>

I purchased the RFID Button - 16mm (125kHz) SEN-09417 and I’m trying to program it from a prox card on that frequency using a Flipper Zero, but it’s not working. Flipper Zero is able to read and copy my prox data from my card and I’m able to use the device to open the door and I know for certain that our prox system is based on 125kHz. Any thoughts about what might be wrong?

---

<div class="post-metadata">

**Author:** ![YellowDog](https://yyz1.discourse-cdn.com/sparkfun/user_avatar/community.sparkfun.com/yellowdog/32/1782_2.png) [@YellowDog](https://community.sparkfun.com/u/YellowDog)\
**Post date:** [August 3, 2023, 8:44pm UTC](https://community.sparkfun.com/t/programming-from-flipper-zero/46006/2 "2023-08-03T20:44:42Z")

</div>

SEN-09417:

32-bit unique ID - non-reprogrammable

EM4001 ISO based RFID IC

They come with a pre programmed ID that can’t be changed.

---

<div class="post-metadata">

**Author:** ![UIUC\_Josh](https://avatars.discourse-cdn.com/v4/letter/u/a587f6/32.png) [@UIUC\_Josh](https://community.sparkfun.com/u/UIUC_Josh)\
**Post date:** [August 4, 2023, 8:18pm UTC](https://community.sparkfun.com/t/programming-from-flipper-zero/46006/3 "2023-08-04T20:18:35Z")

</div>

Gotcha, thanks.
