# Qwiic connection with conductive thread

**URL:** <https://community.sparkfun.com/t/qwiic-connection-with-conductive-thread/45078>\
**Category:** Qwiic System\
**Tags:** qwiic\
**Created:** [January 31, 2023, 8:06am UTC](https://community.sparkfun.com/t/qwiic-connection-with-conductive-thread/45078 "2023-01-31T08:06:30Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![bluehoney](https://avatars.discourse-cdn.com/v4/letter/b/a88e57/32.png) [@bluehoney](https://community.sparkfun.com/u/bluehoney)\
**Post date:** [January 31, 2023, 8:06am UTC](https://community.sparkfun.com/t/qwiic-connection-with-conductive-thread/45078/1 "2023-01-31T08:06:30Z")

</div>

I am studying the integration of QWIIC & MicroMod system into clothing.

QWIIC is amazingly convenient but it has too many wires to be integrated into fashion.

So, I am trying to convert some connection with QWIIC wires with conductive thread.

Will there be maximum resistance of wire(in my case, thread) in connection of SDA, SCL, 3.3V, GRD connection

---

<div class="post-metadata">

**Author:** ![TS-Russell](https://yyz1.discourse-cdn.com/sparkfun/user_avatar/community.sparkfun.com/ts-russell/32/6092_2.png) [@TS-Russell](https://community.sparkfun.com/u/TS-Russell)\
**Post date:** [February 7, 2023, 11:04pm UTC](https://community.sparkfun.com/t/qwiic-connection-with-conductive-thread/45078/2 "2023-02-07T23:04:09Z")

</div>

Yes, and it will probably be pretty short…qwiic/i2c signals drop off very quickly as wire length increase, bc too much resistance is created by the wire itself

Your best bet is to get a couple options and test them to see what might be viable for your use-case…because the actual length will depend on a LOT