# SCP1000 and Linux

**URL:** <https://community.sparkfun.com/t/scp1000-and-linux/8315>\
**Category:** MicroMod\
**Tags:** arm-lpc\
**Created:** [August 28, 2008, 8:37am UTC](https://community.sparkfun.com/t/scp1000-and-linux/8315 "2008-08-28T08:37:01Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ljkenny](https://avatars.discourse-cdn.com/v4/letter/l/aeb1de/32.png) [@ljkenny](https://community.sparkfun.com/u/ljkenny)\
**Post date:** [August 28, 2008, 8:37am UTC](https://community.sparkfun.com/t/scp1000-and-linux/8315/1 "2008-08-28T08:37:01Z")

</div>

Has anyone done this yet?

I am running Linux on an ARM EP9302 and would like to interface it with the SCP1000.

I am currently trying to use SPI, but it’s not as simple as it sounds.

There are 3 different SPI formats that can be used with the EP9302 and I’m a little flummoxed as to where to begin.

---

<div class="post-metadata">

**Author:** ![ljkenny](https://avatars.discourse-cdn.com/v4/letter/l/aeb1de/32.png) [@ljkenny](https://community.sparkfun.com/u/ljkenny)\
**Post date:** [September 28, 2008, 11:18am UTC](https://community.sparkfun.com/t/scp1000-and-linux/8315/2 "2008-09-28T11:18:58Z")

</div>

Should I take that as a no then? ☹