# Using USB-Blaster with quartus debug tool

**URL:** <https://community.sparkfun.com/t/using-usb-blaster-with-quartus-debug-tool/35976>\
**Category:** MicroMod\
**Tags:** arm-lpc\
**Created:** [October 29, 2018, 7:49am UTC](https://community.sparkfun.com/t/using-usb-blaster-with-quartus-debug-tool/35976 "2018-10-29T07:49:18Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![markkang](https://avatars.discourse-cdn.com/v4/letter/m/f19dbf/32.png) [@markkang](https://community.sparkfun.com/u/markkang)\
**Post date:** [October 29, 2018, 7:49am UTC](https://community.sparkfun.com/t/using-usb-blaster-with-quartus-debug-tool/35976/1 "2018-10-29T07:49:18Z")

</div>

Hi

I am using FT232H, I want to use it to connect Quartus programmer and debug tools.

However, when I config interface to usb-blaster, I found Quartus still can’t detect the FT232H or the emulated USB-blaster.

I would like to know, can I use OpenOCD in this way ? or something I should check?

Thanks.

Mark.