# various LCD and OLED ribbon cable connector breakouts

**URL:** <https://community.sparkfun.com/t/various-lcd-and-oled-ribbon-cable-connector-breakouts/7687>\
**Category:** New Product Ideas\
**Created:** [June 20, 2008, 5:20pm UTC](https://community.sparkfun.com/t/various-lcd-and-oled-ribbon-cable-connector-breakouts/7687 "2008-06-20T17:20:01Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![whelzorn](https://avatars.discourse-cdn.com/v4/letter/w/3be4f8/32.png) [@whelzorn](https://community.sparkfun.com/u/whelzorn)\
**Post date:** [June 20, 2008, 5:20pm UTC](https://community.sparkfun.com/t/various-lcd-and-oled-ribbon-cable-connector-breakouts/7687/1 "2008-06-20T17:20:01Z")

</div>

All I want (and can’t find anywhere) is a breakout board for the tiny-pitch connectors that are used with the various LCD and OLED displays sold here. nothing fancy at all. Just the connector to a .1" header. Working with things like this: [http://www.sparkfun.com/commerce/produc … ts\_id=8490](http://www.sparkfun.com/commerce/product_info.php?products_id=8490) or this: [http://www.sparkfun.com/commerce/produc … ts\_id=8498](http://www.sparkfun.com/commerce/product_info.php?products_id=8498) is pretty much impossible for most of us I think.

---

<div class="post-metadata">

**Author:** ![b\_bogk77](https://avatars.discourse-cdn.com/v4/letter/b/7bcc69/32.png) [@b\_bogk77](https://community.sparkfun.com/u/b_bogk77)\
**Post date:** [June 27, 2008, 2:58pm UTC](https://community.sparkfun.com/t/various-lcd-and-oled-ribbon-cable-connector-breakouts/7687/2 "2008-06-27T14:58:20Z")

</div>

I think it’s possible to solder wrapping wires to each pin, for the second model you mentioned.

I did that to make my own board with the color senzor.

[viewtopic.php?t=10500](http://forum.sparkfun.com/viewtopic.php?t=10500)

But to solder so many pins…, you might as well as bite the bullet and design/order you own pcb breakeout.