# venus gps

**URL:** <https://community.sparkfun.com/t/venus-gps/38131>\
**Category:** Retired Products\
**Created:** [November 1, 2019, 8:16pm UTC](https://community.sparkfun.com/t/venus-gps/38131 "2019-11-01T20:16:17Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![smargtp78](https://avatars.discourse-cdn.com/v4/letter/s/439d5e/32.png) [@smargtp78](https://community.sparkfun.com/u/smargtp78)\
**Post date:** [November 1, 2019, 8:16pm UTC](https://community.sparkfun.com/t/venus-gps/38131/1 "2019-11-01T20:16:17Z")

</div>

I am trying to update the baud rate and update rates on my venus gps with sma . The board will update to 20htz and 115200 and run but when I try to save it to flash it times out and locks up until I reset it to 1htz and 9600.