# Weather Kit Anemometer Replacement? **URL:** \ **Category:** Kits\ **Created:** [May 20, 2024, 9:14pm UTC](https://community.sparkfun.com/t/weather-kit-anemometer-replacement/47449 "2024-05-20T21:14:27Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![lambdaknight](https://avatars.discourse-cdn.com/v4/letter/l/59ef9b/32.png) [@lambdaknight](https://community.sparkfun.com/u/lambdaknight)\ **Post date:** [May 20, 2024, 9:14pm UTC](https://community.sparkfun.com/t/weather-kit-anemometer-replacement/47449/1 "2024-05-20T21:14:27Z")
![IMG_4862.jpeg](https://canada1.discourse-cdn.com/sparkfun/original/3X/7/1/7148a09fab61e4b40838fbb2c6492f1148f80d1a.jpeg) That wind storm a little bit ago threw something at my weather station and knocked the anemometer thingie off. Is it possible to just get that piece? ---
**Author:** ![TS-Russell](https://yyz1.discourse-cdn.com/sparkfun/user_avatar/community.sparkfun.com/ts-russell/32/6092_2.png) [@TS-Russell](https://community.sparkfun.com/u/TS-Russell)\ **Post date:** [May 20, 2024, 10:44pm UTC](https://community.sparkfun.com/t/weather-kit-anemometer-replacement/47449/2 "2024-05-20T22:44:58Z")
We only sell the whole kit [https://www.sparkfun.com/products/15901](https://www.sparkfun.com/products/15901) It does look like there’s a small bore for that mounting shaft, you could probably use a small piece of rod cut to where it barely juts up from the bottom to help align the 2 sides and then epoxy/glue them back together…just be careful to not get glue on the bearing (inside top half, can be avoided by letting it dry upright) ---
**Author:** ![languer](https://yyz1.discourse-cdn.com/sparkfun/user_avatar/community.sparkfun.com/languer/32/2998_2.png) [@languer](https://community.sparkfun.com/u/languer)\ **Post date:** [May 22, 2024, 6:41am UTC](https://community.sparkfun.com/t/weather-kit-anemometer-replacement/47449/3 "2024-05-22T06:41:52Z")
You can check wh-sp-ws01; could be a close replacement.