# What is tolerance of line follower in huskylens

**URL:** <https://community.sparkfun.com/t/what-is-tolerance-of-line-follower-in-huskylens/64733>\
**Category:** IMU & Motion\
**Created:** [April 22, 2025, 6:47pm UTC](https://community.sparkfun.com/t/what-is-tolerance-of-line-follower-in-huskylens/64733 "2025-04-22T18:47:12Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Loren1](https://avatars.discourse-cdn.com/v4/letter/l/ee59a6/32.png) [@Loren1](https://community.sparkfun.com/u/Loren1)\
**Post date:** [April 22, 2025, 6:47pm UTC](https://community.sparkfun.com/t/what-is-tolerance-of-line-follower-in-huskylens/64733/1 "2025-04-22T18:47:12Z")

</div>

what is tolerance of line follower in huskylens

---

<div class="post-metadata">

**Author:** ![TS-Russell](https://yyz1.discourse-cdn.com/sparkfun/user_avatar/community.sparkfun.com/ts-russell/32/6092_2.png) [@TS-Russell](https://community.sparkfun.com/u/TS-Russell)\
**Post date:** [April 22, 2025, 7:16pm UTC](https://community.sparkfun.com/t/what-is-tolerance-of-line-follower-in-huskylens/64733/2 "2025-04-22T19:16:37Z")

</div>

There isn’t a hard-set tolerance, it’s all based on how clearly delineated your example sets are…check out 7.4 here [Gravity: HUSKYLENS AI Machine Vision Sensor - DFRobot Wiki](https://wiki.dfrobot.com/HUSKYLENS_V1.0_SKU_SEN0305_SEN0336)

---

<div class="post-metadata">

**Author:** ![Loren1](https://avatars.discourse-cdn.com/v4/letter/l/ee59a6/32.png) [@Loren1](https://community.sparkfun.com/u/Loren1)\
**Post date:** [April 22, 2025, 11:07pm UTC](https://community.sparkfun.com/t/what-is-tolerance-of-line-follower-in-huskylens/64733/3 "2025-04-22T23:07:43Z")

</div>

do you have a line follower that if within a few mm of pencile line would be very accurate