# What's the larged BatchPCB you've done?

**URL:** <https://community.sparkfun.com/t/whats-the-larged-batchpcb-youve-done/8634>\
**Category:** BatchPCB\
**Created:** [October 2, 2008, 1:02am UTC](https://community.sparkfun.com/t/whats-the-larged-batchpcb-youve-done/8634 "2008-10-02T01:02:51Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![bigglez](https://avatars.discourse-cdn.com/v4/letter/b/ac91a4/32.png) [@bigglez](https://community.sparkfun.com/u/bigglez)\
**Post date:** [October 2, 2008, 1:02am UTC](https://community.sparkfun.com/t/whats-the-larged-batchpcb-youve-done/8634/1 "2008-10-02T01:02:51Z")

</div>

The BatchPCB rules are “Any size up to 10x15”, measured

in inch increments".

I expected to only need smallish boards, but something

I’m working on would push the PCB size larger.

Currently I have fabbed a couple of 4 x 6 (24 sq in)

PCBs, which cost around eighty bucks each through

BatchPCB.

Has anyone used this service for larger single PCBs?

---

<div class="post-metadata">

**Author:** ![gussy](https://avatars.discourse-cdn.com/v4/letter/g/91b2a8/32.png) [@gussy](https://community.sparkfun.com/u/gussy)\
**Post date:** [October 2, 2008, 4:59am UTC](https://community.sparkfun.com/t/whats-the-larged-batchpcb-youve-done/8634/2 "2008-10-02T04:59:12Z")

</div>

For bigger boards I usually just get a panel made at GoldPheonix. BatchPCB becomes expensive when you want a couple of larger boards, probably more expensive than a 650sq. cm panel at GP ($89)

---

<div class="post-metadata">

**Author:** ![gussy](https://avatars.discourse-cdn.com/v4/letter/g/91b2a8/32.png) [@gussy](https://community.sparkfun.com/u/gussy)\
**Post date:** [October 2, 2008, 4:59am UTC](https://community.sparkfun.com/t/whats-the-larged-batchpcb-youve-done/8634/3 "2008-10-02T04:59:48Z")

</div>

For bigger boards I usually just get a panel made at GoldPheonix. BatchPCB becomes expensive when you want a couple of larger boards, probably more expensive than a 650sq. cm panel at GP ($89)

---

<div class="post-metadata">

**Author:** ![gussy](https://avatars.discourse-cdn.com/v4/letter/g/91b2a8/32.png) [@gussy](https://community.sparkfun.com/u/gussy)\
**Post date:** [October 2, 2008, 5:01am UTC](https://community.sparkfun.com/t/whats-the-larged-batchpcb-youve-done/8634/4 "2008-10-02T05:01:45Z")

</div>

For bigger boards I usually just get a panel made at GoldPheonix. BatchPCB becomes expensive when you want a couple of larger boards, probably more expensive than a 650sq. cm panel at GP ($89)

---

<div class="post-metadata">

**Author:** ![gussy](https://avatars.discourse-cdn.com/v4/letter/g/91b2a8/32.png) [@gussy](https://community.sparkfun.com/u/gussy)\
**Post date:** [October 2, 2008, 5:02am UTC](https://community.sparkfun.com/t/whats-the-larged-batchpcb-youve-done/8634/5 "2008-10-02T05:02:17Z")

</div>

Stupid for with its errors… Sorry for the triple post.

---

<div class="post-metadata">

**Author:** ![rpcelectronics](https://avatars.discourse-cdn.com/v4/letter/r/d07c76/32.png) [@rpcelectronics](https://community.sparkfun.com/u/rpcelectronics)\
**Post date:** [October 7, 2008, 12:09am UTC](https://community.sparkfun.com/t/whats-the-larged-batchpcb-youve-done/8634/6 "2008-10-07T00:09:49Z")

</div>

> gussy:  
> For bigger boards I usually just get a panel made at GoldPheonix. BatchPCB becomes expensive when you want a couple of larger boards, probably more expensive than a 650sq. cm panel at GP ($89)

Same here. BPCB is great for onesees and twosees of small boards like breakouts or simple prototypes. Anything bigger than 2"x2", I just get a whole $89 batch done through Gold Phoenix. 9 out of 10 times, anything bigger than 2"x2" is somthing I intend to sell eventually. If I get lucky on my first run, I end up with a batch of usable, sellable boards 😃