# Wii Remote and BlueSmirf Modem

**URL:** <https://community.sparkfun.com/t/wii-remote-and-bluesmirf-modem/7771>\
**Category:** Wireless & IoT\
**Created:** [July 2, 2008, 3:37am UTC](https://community.sparkfun.com/t/wii-remote-and-bluesmirf-modem/7771 "2008-07-02T03:37:56Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![awelch](https://avatars.discourse-cdn.com/v4/letter/a/bcef8e/32.png) [@awelch](https://community.sparkfun.com/u/awelch)\
**Post date:** [July 2, 2008, 3:37am UTC](https://community.sparkfun.com/t/wii-remote-and-bluesmirf-modem/7771/1 "2008-07-02T03:37:56Z")

</div>

Is there any way to get a wii remote to talk to a bluesmirf modem ( or other bluetooth device ) ?

I’d like to control a robot directly with a wii remote without having to relay wiimote deltas through a pc.

Thanks,

andrew

---

<div class="post-metadata">

**Author:** ![pelrun](https://avatars.discourse-cdn.com/v4/letter/p/e9c0ed/32.png) [@pelrun](https://community.sparkfun.com/u/pelrun)\
**Post date:** [July 2, 2008, 4:59am UTC](https://community.sparkfun.com/t/wii-remote-and-bluesmirf-modem/7771/2 "2008-07-02T04:59:25Z")

</div>

I wish ☹

The wiimote uses HID to communicate, but the only profile the smirf supports is SPP (i.e. serial). If there was a way to get to the underlying L2CAP layer then a rudimentary HID profile could be (and has been) implemented on a uC, but it doesn’t appear to be possible.