# Xbee 2.5 and Funnel IO Help ?!?

**URL:** <https://community.sparkfun.com/t/xbee-2-5-and-funnel-io-help/10265>\
**Category:** Wireless & IoT\
**Created:** [February 28, 2009, 2:24pm UTC](https://community.sparkfun.com/t/xbee-2-5-and-funnel-io-help/10265 "2009-02-28T14:24:03Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ameyer](https://avatars.discourse-cdn.com/v4/letter/a/34f0e0/32.png) [@ameyer](https://community.sparkfun.com/u/ameyer)\
**Post date:** [February 28, 2009, 2:24pm UTC](https://community.sparkfun.com/t/xbee-2-5-and-funnel-io-help/10265/1 "2009-02-28T14:24:03Z")

</div>

I have a Funnel IO with xbee 2.5, and xbee explorer with an xbee 2.5.

I had them talking ONCE. But I tried a different sketch, and now even after going back, they wont form a network.

I have one (on the funnel) set as a 2.5 Router AT

And the other (on the xbee explorer) set as a 2.5 coordinator AT

I followed this to a t

[http://www.humboldt.edu/~cm19/XBee%20setup.pdf](http://www.humboldt.edu/~cm19/XBee%20setup.pdf)

I can communicate with them through serial, they just wont talk to each other.

Like I said, it did work once, I even have video proof =)

Any ideas?

---

<div class="post-metadata">

**Author:** ![ameyer](https://avatars.discourse-cdn.com/v4/letter/a/34f0e0/32.png) [@ameyer](https://community.sparkfun.com/u/ameyer)\
**Post date:** [February 28, 2009, 5:21pm UTC](https://community.sparkfun.com/t/xbee-2-5-and-funnel-io-help/10265/2 "2009-02-28T17:21:33Z")

</div>

I believe I fixed it.

I re uploaded the firmware to both xbees.

I think I may have tried to write to the funnel (via FTDI) while the xbee was connected and it messed it up.

It all seems to be working now.
