# XBee Micro Python Qwiic MCP960X

**URL:** <https://community.sparkfun.com/t/xbee-micro-python-qwiic-mcp960x/47290>\
**Category:** Digi XBee\
**Tags:** xbee\
**Created:** [April 15, 2024, 8:14pm UTC](https://community.sparkfun.com/t/xbee-micro-python-qwiic-mcp960x/47290 "2024-04-15T20:14:43Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tatonka](https://avatars.discourse-cdn.com/v4/letter/t/e47774/32.png) [@Tatonka](https://community.sparkfun.com/u/Tatonka)\
**Post date:** [April 15, 2024, 8:14pm UTC](https://community.sparkfun.com/t/xbee-micro-python-qwiic-mcp960x/47290/1 "2024-04-15T20:14:43Z")

</div>

Can the programmable Xbee(s) use the micro-python Qwiic library to talk across an I2C IO pin connection(Qwiic) for an MCP960X Qwiic board? If yes, would anyone happen to know of an example? I’d like to bypass a microcontroller and report the temperature across the network. I’m thinking no, but I thought I’d ask the brain trust since the new SF/Digi boards have a Qwiic connector.

Thanks in advance.

---

<div class="post-metadata">

**Author:** ![TS-Russell](https://yyz1.discourse-cdn.com/sparkfun/user_avatar/community.sparkfun.com/ts-russell/32/6092_2.png) [@TS-Russell](https://community.sparkfun.com/u/TS-Russell)\
**Post date:** [April 15, 2024, 9:49pm UTC](https://community.sparkfun.com/t/xbee-micro-python-qwiic-mcp960x/47290/2 "2024-04-15T21:49:26Z")

</div>

No, the boards themselves don’t have an MCU (nor a connection between the serial converter and qwiic [https://cdn.sparkfun.com/assets/b/e/f/6 … ematic.pdf](https://cdn.sparkfun.com/assets/b/e/f/6/a/22043_SparkFun_Digi_XBee_Explorer_USB-C_Schematic.pdf))

They all need an xbee module to complete their circuits (the other boards’ schematics appear similar)

---

<div class="post-metadata">

**Author:** ![Tatonka](https://avatars.discourse-cdn.com/v4/letter/t/e47774/32.png) [@Tatonka](https://community.sparkfun.com/u/Tatonka)\
**Post date:** [April 16, 2024, 2:25pm UTC](https://community.sparkfun.com/t/xbee-micro-python-qwiic-mcp960x/47290/3 "2024-04-16T14:25:59Z")

</div>

TS-Russell,

I’m curious because the Digi site says they have a Freescale processor embedded in the chip that the radio can connect to internally. I understand the radio cannot perform I2C functions, but the Freescale processor should be able to, as it supports micro-Python programming of IO pins.

---

<div class="post-metadata">

**Author:** ![Tatonka](https://avatars.discourse-cdn.com/v4/letter/t/e47774/32.png) [@Tatonka](https://community.sparkfun.com/u/Tatonka)\
**Post date:** [April 16, 2024, 2:30pm UTC](https://community.sparkfun.com/t/xbee-micro-python-qwiic-mcp960x/47290/4 "2024-04-16T14:30:10Z")

</div>

So, page 82 of the [https://www.digi.com/resources/document … 002219.pdf](https://www.digi.com/resources/documentation/digidocs/PDFs/90002219.pdf) references Digi’s I2C class library. If they have that, I was wondering if I could link and compile the QWIIC library to theirs.

---

<div class="post-metadata">

**Author:** ![TS-Russell](https://yyz1.discourse-cdn.com/sparkfun/user_avatar/community.sparkfun.com/ts-russell/32/6092_2.png) [@TS-Russell](https://community.sparkfun.com/u/TS-Russell)\
**Post date:** [April 17, 2024, 6:52pm UTC](https://community.sparkfun.com/t/xbee-micro-python-qwiic-mcp960x/47290/5 "2024-04-17T18:52:51Z")

</div>

Maybe! You could certainly try it. I was just going by our schematic (which doesn’t have a path for i2c’s d1 & d11 to the USB-UART) ; if you re-mapped things maybe it could work
