# Zio 16 Servo Controller (Qwiic)

**URL:** <https://community.sparkfun.com/t/zio-16-servo-controller-qwiic/40843>\
**Category:** Qwiic System\
**Tags:** qwiic\
**Created:** [November 7, 2020, 5:19pm UTC](https://community.sparkfun.com/t/zio-16-servo-controller-qwiic/40843 "2020-11-07T17:19:01Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![josimi](https://avatars.discourse-cdn.com/v4/letter/j/b782af/32.png) [@josimi](https://community.sparkfun.com/u/josimi)\
**Post date:** [November 7, 2020, 5:19pm UTC](https://community.sparkfun.com/t/zio-16-servo-controller-qwiic/40843/1 "2020-11-07T17:19:01Z")

</div>

I have been looking at this Qwiic based servo controller:

[https://www.sparkfun.com/products/16773](https://www.sparkfun.com/products/16773)

Obviously, it has another connector for the 2.3-5.5V supply voltage, but I can’t seem to find out what type of connector this is.

---

<div class="post-metadata">

**Author:** ![TS-Chris](https://yyz1.discourse-cdn.com/sparkfun/user_avatar/community.sparkfun.com/ts-chris/32/6057_2.png) [@TS-Chris](https://community.sparkfun.com/u/TS-Chris)\
**Post date:** [November 9, 2020, 6:17pm UTC](https://community.sparkfun.com/t/zio-16-servo-controller-qwiic/40843/2 "2020-11-09T18:17:24Z")

</div>

Looks like a JST-PH connector and our single cell LiPo batteries have a mating plug on them. If you had your own battery or power source, a connector like [[PRT-08670](https://www.sparkfun.com/products/8670) should also work for you.]([Jumper Wire - JST Black Red - PRT-08670 - SparkFun Electronics](https://www.sparkfun.com/products/8670))