Facet & SW Maps converting to Arcgis

[rftop]

@Simpsriu

Do you know why my NTRIP, that’s in SWMaps, keeps disconnecting ??

My best guess is here:

Facet & SW Maps no longer working with NTrip

@Simpsriu, I turned off all unnecessary NMEA messages. The idea is to have plenty of available bandwidth over Bluetooth to make sure the GGA is sent to the caster every 10 seconds. Most NTRIP Casters that I’ve used will disconnect if they don’t receive a GGA every 30 seconds or less. I obviously don’t know if this is your issue, but you might want to try it ? My Torch Settings Menu: Message NMEA 1) Message GPDTM: 0 2) Message GPGBS: 0 3) Message GPGGA: 1 (could be higher if you wish) 4) Message GPGLL: 0 5) Message GPGNS: 0 6) Message GPGRS: 0 7) Message GPGSA: 0 8) Message GPGST: 4 ( <5 keeps most Apps happy reporting the RTK residuals) 9) Message GPGSV: 10 ( this one is a bandwidth HOG ! ) 10) Message GPRMC: 1 11) Message GPROT: 0 12) Message GPTHS: 0 13) Message GPVTG: 0 14) Message GPZDA: 0 x) Exit My Facet Settings: Menu: Message NMEA_ 1) Message UBX_NMEA_DTM: 0 2) Message UBX_NMEA_GBS: 0 3) Message UBX_NMEA_GGA: 1 4) Message UBX_NMEA_GLL: 0 5) Message UBX_NMEA_GNS: 0 6) M…