Dear all. I am trying to use Serial1 on pins D9/10 on my Artemis nano board to talk to a sensor and i have some very strange behavior. If i try : #define BAUD 115200 // any number, common choices: 9600, 115200, 230400, 921600 #define CONFIG SERIAL_8N1 // a config value from HardwareSerial.h…

how to use Serial1 on Artemis nano?

dykesc November 26, 2022, 8:17pm 5

Could this explain why, after defining my SDA and SCL as D10/D9 in the Apollo 3 I2C example, my INA219 sensor is detected when it is wired to Nano pins 6/7?

Topic		Replies	Views
Serial module seems to write to incorrect pins Artemis	0	1679	November 6, 2020
Serial.begin(115200); Artemis	6	1766	November 21, 2022
RX1 AND TX1 connection Artemis	8	1490	March 29, 2021
Using both UARTs on Artemis Nano Artemis	4	1587	December 17, 2019
RedBoard Artemis Nano Serial NOT Working Artemis	4	1339	July 6, 2021

how to use Serial1 on Artemis nano?

Related topics