Dear all. I am trying to use Serial1 on pins D9/10 on my Artemis nano board to talk to a sensor and i have some very strange behavior. If i try : #define BAUD 115200 // any number, common choices: 9600, 115200, 230400, 921600 #define CONFIG SERIAL_8N1 // a config value from HardwareSerial.h…

I have tried this on my ATP (do not have a Nano) and can not reproduce it. In the many projects with different Artemis boards (Edge, ATP, Micromod etc) never had this problem. I check the Nano pins for Serial and Serial1 and they are differently assigned. Looks to me like a corrupt board library. Tr…

Thank you so much for your answer Paul. I will try to reinstal the lib and recheck. Will keep you posted

Given that someone else also complained about Serial speed setting I have bought an Artemis Nano. Compiled your example and … now I got the same problem as you. I could not set the speed for Serial and Serial1 independent from each other and the data is showing up BOTH on Serial as well as Serial1. …

Could this explain why, after defining my SDA and SCL as D10/D9 in the Apollo 3 I2C example, my INA219 sensor is detected when it is wired to Nano pins 6/7?

no, but I will answer this on your original post not to mix topics.

paulvha: Given that someone else also complained about Serial speed setting I have bought an Artemis Nano. Compiled your example and … now I got the same problem as you. I could not set the speed for Serial and Serial1 independent from each other and the data is showing up BOTH on Serial as well …

So after not being able to get Serial1 output on any pins, and trying everything in github issues, i found the updated the mbed lib here and tried it, and just to confirm, the bdaddr does change. Reverting the lib baxk to stock so far after 2 arduino restarts, and deleting the cache inbetween has no…

Randomly the og bdaddr came back. Something musta still been cached. Sorry for false report on not changing back

The fix is working well for me to! thank you!

how to use Serial1 on Artemis nano?

Development Boards Artemis

dykesc November 27, 2022, 5:58pm 7

Thanks

Topic		Replies	Views
Using both UARTs on Artemis Nano Artemis	4	1636	December 17, 2019
RX1 AND TX1 connection Artemis	8	1563	March 29, 2021
Problem with Arduino_Apollo3 Core Artemis	1	401	May 17, 2022
Serial.begin(115200); Artemis	6	1881	November 21, 2022
Serial module seems to write to incorrect pins Artemis	0	1694	November 6, 2020

how to use Serial1 on Artemis nano?

Related topics