Hi, I am trying to reconfigure TXRX such that Serial1 TX RX is through D8 and D9 - assigned as qwicc SCL and SDA by default. I thought i could do this easily by modifying configureSerial1TxRx() like below: void configureSerial1TxRx(void) // Configure pins 8 and 9 for UART1 TX and RX { am_hal_gpi…

OLA: Mapping Uart1 TX and RX to D8 and D9.

PaulZC July 17, 2023, 6:09am 3

Hi Hj,

No problem. Glad that is working for you.

Best wishes,

Paul