The webpage (http://www.sparkfun.com/commerce/produc … cts_id=718) for the new FTDI232RL breakout board appears to be missing a link to the schematic. I was just wondering what pins were brought out to the holes on the sides. I see Rx, Tx, Gnd, and 3.3V but I was wondering if all of the other data pins like DTR, RTS, RI, DSR, DCD, and CTS were brought as well?
Something with the physical dimensions would be nice too…
Owen just got it posted:
http://www.sparkfun.com/datasheets/Brea … ematic.PDF
We are not too good at dimensional drawings. Anyone have a recommendation on how to create them in Eagle or any other technique short of a Pro-E model?
-Nathan
sparky:
Owen just got it posted:http://www.sparkfun.com/datasheets/Brea … ematic.PDF
We are not too good at dimensional drawings. Anyone have a recommendation on how to create them in Eagle or any other technique short of a Pro-E model?
-Nathan
I use Pulsonix which has very good dimensioning facilities. You might be able to export a DXF file and add the dimensions in a standard 2D CAD program.
Leon