All,
I just posted an article about basic communication between Xbee module and PIC18 micro, as well as some C code, here → http://circuitsathome.com/mcu/programming/playing-xbee. Check it out.
hi, please help me with xbee, i’m also interfacing xbee with 18F, 18f4550.
I’m connected with xbee only with rx, tx and gnd. If i send data from :
pic ->xbee ))))))xbee->pic i got huge lag. i tryed to send 0 to 9(with 1s delay between chars) in a for loop from one pic to another and i receive first 9 chars ok, but after that it stops and receiving 3-4 bytes at a time, and i lose data. i can give you the schematic, code, everything you need, please help me.
Post it here. Don’t forget to use ```