Your Idea of My Final Project?

Hi everyone,

I want to give an idea for my final project. I will tell you about that project:

I have 3 quadrotors and these quadrotors have ardupilots. One of these will be commander quadrotor and I will

control this quadrotor via computer. So i will setup a wireless network. This is first level of my project.

Secondly, other 2 quadrotors will controlled by commander quadrotor. For example; when i control commander

quadrotor, i will press a key on keyboard. Then, the commander quadrotor will send a command to take off the

other quadrotors. Then, when i will press another key, the other quadrotors will land.

Shortly, my project is in this way. All quadrotors have ardupilot(atmega 2560).

Now, What equipments do I need for sending and taking commands(xbee, arduino wifi shieldsi,…)? Do you know any

sources about computer controlled quadrotor?

Help please…

What have you found for yourself?

We are designing quadrotors now and thinking autonomous system

For the networking kind of set up you are describing, you may want to go with Xbees Series 2 and set up a mesh network between your quadrotor. Take a look at the following information:

https://www.sparkfun.com/pages/xbee_guide

Thanks, I read that. I think, we will use it