Howdy,
Just a moment to share my success with the Segger-EDU usb JTAG dongle and my Nano (Blackboard). The SDK example are significant well worth studying.
Howdy,
Just a moment to share my success with the Segger-EDU usb JTAG dongle and my Nano (Blackboard). The SDK example are significant well worth studying.
Hi
Can you please share the settings and steps? Very cool!
Yes I’d love to see the settings, how to reproduce this, anything that would help.
Regards,
Kevin
There is a good post on how to do this here: viewtopic.php?f=171&t=51492
I read through the PDF (very well written, by the way) and tried to follow all of the steps, but I am not able to Debug/Go successfully. I have attempted to attach a PDF of my own showing my set-up ( in this case Artemis ATP with J-link EDU ), and also the the resulting error when I attempt to upload to the board and start the debugger. I know the J-link is OK since I use it with other boards with Atmel Studio 7.
Any advice or suggestions would be appreciated !
Update:
Everything working now, per the procedure posted by robotastic.