Hello, There are a couple of resistors (R3 & R4) connected to the EN pin by default, if I want to use the EN pin in a normal fashion such as connecting to an MCU or ON/OFF controller IC, should I remove these resistors from the board? Or would just connecting up to EN still be OK with these resisto…

Hardware Overview - Hookup Guide - 5V Buck and BabyBuck Regulator (AP63357) A hookup guide for the 5V Buck and BabyBuck Regulators (AP63357DV)

Buck regulator 5V (AP63357) - Use of EN pin

YellowDog August 21, 2024, 9:10am 2

2 Likes

Topic		Replies	Views
SparkFun Buck Regulator Breakout - 3.3V (AP63203) Only - Enable pin resistors question Power	3	1900	January 10, 2024
breakout 3.3V_EN ? MicroMod carrier	4	749	December 9, 2021
AP63357 - What if Vin = Vout? Power	5	1884	August 24, 2023
SparkFun Buck-Boost Converter - Disabled mode Power	2	3070	December 1, 2020
Baby buck 3v3 w/18v supply and pro mini 3v3 Power	1	11	March 11, 2025