Cant upload any of the programs

Archive Microview Support
1

Double checked everything, I can see when I plug in Microview, I get Com2.

I make sure IDE is set to Com2.

Program will veryify and compile.

But when I do the upload, I get the following error:

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x01avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x01avrdude: stk500_recv(): programmer is not responding

.

.

.

2

Hi,

  1. Have you selected the board as Arduino UNO or MicroView?

  2. If you have selected the right board, could you try with the latest FTDI driver please?

Cheers

JP

3

Getting the same problem and I have selected the board as the UNO. After installing the FTDI driver I have a COM1 port that only shows up when the microview is plugged in so I don’t think its one of those two problems. My error looks like

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0xae

4

Hi Moses,

Can you contact SparkFun customer service quoting this thread and get RMA organized for you please?

Cheers

JP