Connecting/Addressing Dual Qwiic Scales (NAU7802)

Is it possible and if so what are the steps to connect and uniquely address two or more Qwiic Scales (NAU7802) in a daisy chain configuration?

You’d just need something like https://www.sparkfun.com/products/16784 and use its guide https://learn.sparkfun.com/tutorials/qw … okup-guide to set up to 8 on one mux

Side note: you’ll need to disable the i2c pull-ups on all but one device (I’d leave the mux’s in-place and disable all of the NAU’s) https://learn.sparkfun.com/tutorials/qw … e-assembly (scroll up one paragraph)