Hey folks,
We’ve launched a platform for collaborative work on hardware projects http://www.diyzer.com and need your feedback to see if we’re moving in the right direction.
We tried to standardize how we write instructions for our DIY projects, added Git repos so that code and instructions can be stored in the same place and added ability to submit each other patches, it’s done with software. You can then review those patches to see what other users suggest you to improve in your project and accept them, decline or ask for more changes.
We’re also working on simplified schematics design tool (youtube video of the concept), which should replace pictures with lots of wires and parts, where it’s difficult to find out where things are connected.
You can find some more info on how it’s different from Instructables and other here. And the getting started guide here
Some project examples:
http://www.diyzer.com/projects/solar-po … -interface
http://www.diyzer.com/projects/arduino-metronome
http://www.diyzer.com/projects/environment-sensor
We don’t have ticketing system in place yet, so please feel free to post your feedback right in this thread or drop us an email to info@diyzer.com
Thanks