Help on getting the code

_Chan_Aidan · May 9, 2025, 7:34am

What is the problem with the code

Give us the right code to say “hello world” example

YellowDog · May 9, 2025, 7:41am

github.com/sparkfun/SparkFun_SerLCD_Arduino_Library

examples/Example1-HelloWorld/Example1-HelloWorld.ino

master

/*
  SerLCD Library - Hello World
  Gaston Williams - August 29, 2018

  This sketch prints "Hello World!" to the LCD
  and shows the time over I2C using the Qwiic system.

  The circuit:
   SparkFun RGB OpenLCD Serial display connected through
   a Sparkfun Qwiic adpater to an Ardruino with a
   Qwiic shield or a Sparkfun Blackboard with Qwiic built in.

  The Qwiic adapter should be attached to the display as follows:
  Display	/ Qwiic Cable Color
 	GND	/	Black
 	RAW	/	Red
 	SDA	/	Blue
 	SCL	/	Yellow

  Note: If you connect directly to a 5V Arduino instead, you *MUST* use

This file has been truncated. show original

_Chan_Aidan · May 9, 2025, 7:45am

what library do we need to install

YellowDog · May 9, 2025, 7:49am

23044 · May 9, 2025, 7:49am

how do you do with only red board and the LCD screen, if that was the only option?

23044 · May 9, 2025, 7:56am

what about for the air quality sensor combo?

23044 · May 9, 2025, 7:57am

we were hoping to get this to work as well and then maybe combine this with the LCD to let the LCD display the air quality

YellowDog · May 9, 2025, 10:06am

I suggest reading the hookup guides for all boards. They can be found on the product pages.

Topic		Replies	Views
unable to find QwiicserLCD.h Displays	3	1463	November 30, 2023
Can't get my LCD to display after boot up Qwiic System	5	39	September 24, 2024
SerLCD display will not display text Displays	4	743	October 8, 2021
LIne 4 of the 20 x 4 LCD Display Displays	1	568	November 9, 2021
Using RP2040 and qwiic_serlcd.py - no success Raspberry Pi	6	28	May 3, 2025

Help on getting the code

Related topics