I2C detect

Hi,

I’m running a raspberry pi which is connected to a Qwiic pHAT 2.0. I want to read data from multiple ENS160/BME280 sensors but I can only detect I2C for one breakout. The first breakout is connected to the pHAT and the second is connected to the first breakout.

How can I read data from both breakouts? Is my setup correct for what I’m trying to achieve or am I missing something?

Regards,

S

You need to alter both of the address jumpers of ONE board; see https://docs.sparkfun.com/SparkFun_Envi … w/#jumpers

You might also need to disable the i2c jumper for one as well, test first and if both aren’t detected also disable the i2c jumper by cutting its trace (also in the link above)