Logomatic V2 picture doesn't match documentation

Archive SparkFun Site Questions/Comments
1

The 3 pictures on the Logomatic V2 page,.http://www.sparkfun.com/commerce/produc … ts_id=8627, shows a board wich doesn’t match documentation and files.

http://www.sparkfun.com/commerce/images … L_i_ma.jpg

It shows a board with more connections availables, SPI, SCi, but with less ADC inputs.

On the announcment page, it shows a board that match.

http://www.sparkfun.com/commerce/images … L_i_ma.jpg

Wich picture represent the product sold? I would prefer the first one, wich have additional serial port, both SCI and SPI, available.

Angelo

2

My board recently received from SFE matchs the top pic except for the masking tape on the USB connector. Don’t know why it’s there but it is on my board. Have more coming soon so now I’m curious as to what I’ll get…

3

The current photos on the Logomatic v2 product page accurately reflect what you will receive.

http://www.sparkfun.com/commerce/produc … ts_id=8627

However, the picture in the datasheet is incorrect, but shouldn’t cause any confusion, as the placement of the components and pinouts are the same.

Also, schematic is updated.

-Support

4

Thanks for the update.

And why not putting additional breakouts pins to have all the LPC2148 free I/O pins. The board will become more versatile at no extra cost :smiley:

Angelo

5

Thanks, we will take your suggestion into consideration. However, we are trying to have a small footprint for the logomatic as it is sometimes used as a peripheral in smaller embedded systems.

Thanks for your product suggestion.

-Support