NRST & TRST are not connected

Development Boards MicroMod
1

Hi

I am using AT91SAM7A1-EK board from Atmel.

after checking the board schematics I found that both SRST and TRST are not connected.

What should be the configuration for resetting the board?

I mean what should I put in the .cfg file in reset_config?

Is “reset_config none” OK?

Salam

Hossam Alzomor

2

If the reset signals are not connected to the JTAG (I really doubt that), then you have no other choice.

4/3!!